Search
Advanced search
Filter by category
Filter by committee
Search results
-
In light of COVID-19 (coronavirus) and growing safety concerns for members and staff, ASTM International announced today that previously scheduled April standards development meetings in Boston (March 29-April 3) and Prague (April 27-30) have been canceled. The decision was based on several factors, including, but not limited to: Continued review of information and recommendations from the U.S.…, Media Inquiries:, Dan Bergels, tel +1.610.832.9602; dbergels@astm.org Release #10993
-
Activated carbon is processed to have small, low-volume pores that increase the surface area available for adsorption. It has applications in the medical, environmental and energy realms, among others. Since 1962, ASTM International Committee D28 on Activated Carbon has developed standards that play a pre-eminent role in how activated carbon is used. A D28 subcommittee, D28.02 on Liquid Phase…, WK47401, Xylenol Orange Dye, The xylenol orange dye test is a way to determine the relative adsorption rate of unused or reactivated carbons by adsorption of xylenol orange from aqueous solution. This is an important means for deciding which type of activated carbon to use to a specific water treatment application. “Activated carbon performance can roughly be defined as a combination of the ability to adsorb a particular…, WK47421, Particle Size Distribution, Mercury flue gas, home water filters and potable water treatment are the main applications in which powdered and fine mesh carbons are used. A proposed new test method will describe how a laser light scattering technique can determine the particle size distribution of fine mesh activated carbon. ASTM member Neal Megonnell, vice president, sales and marketing, Haycarb USA, says the proposed test…, ASTM Committee D28 Next Meeting:, April 27, April Committee Week, Anaheim, Calif., Technical Contact:, (WK47401) Adam Redding, Ph.D., Evoqua Water Technologies LLC, Northwest, Pa., tel +1.724.719.0805; adam.redding@evoqua.com and (WK47421) Neal E. Megonnell, Haycarb USA, Pittsburgh, Pa., tel +1.412.709.7487; neal@haycarbusa.com, ASTM Staff Contact:, Kelly Paul, tel +1.610.832.9745; kpaul@astm.org, ASTM PR Contact:, Barbara Schindler, tel +1.610.832.9603; bschindl@astm.org Release #9731
-
ASTM Fence Committee Approves New Standards on Ornamental Aluminum Fencing and Polymer Privacy SlatsASTM International Committee F14 on Fences has recently approved two new standards: ASTM F2957 , Specification for Ornamental Aluminum Fence Systems; and ASTM F3000/F3000M , Specification for Polymer Privacy Insert Slats for Chain Link Fabric and Privacy Chain Link Fabric Manufactured Containing Pre-Installed Privacy Slats., Ornamental Aluminum Fence Systems, ASTM F2957 was developed by Subcommittee F14.35 on Architectural Metal Fence Systems. The new standard defines minimum selection criteria and test procedures to ensure product users that an ornamental aluminum fence system has sufficient strength to withstand reasonable loads and forces, and has the appropriate combination of material and organic coating surface protection to withstand effects of…, Polymer Privacy Insert Slats, ASTM F3000/F3000M is under the jurisdiction of Subcommittee F14.40 on Chain Link Fence and Wire Accessories . ASTM F3000/F3000M covers both inserted slats that are placed into chain link fabric after the fence has been installed as well as slats that are pre-inserted into chain link mesh during the link weaving process. According to William Ullrich, principal, Link Consulting LLC, and an F14…, ASTM Committee F14 Next Meeting:, June 25, 2013, ASTM International Headquarters, West Conshohocken, Pa., Technical Contact:, (ASTM F2957) Larry Burkholder, Digger Specialties Inc., Bremen, Ind., Phone: 574-546-5999; lburkholder@diggerspecialties.com; (ASTM F3000/F3000M) William Ullrich, Link Consulting LLC, Annapolis, Md., Phone: 410-849-2610; bullrich.link@comcast.net , ASTM Staff Contact:, Thomas O’Toole, Phone: 610-832-9739; totoole@astm.org , ASTM PR Contact:, Barbara Schindler, Phone: 610-832-9603; bschindl@astm.org Release #9375
-
Slats inserted into chain link fences can provide up to 95 percent more privacy and enhance the aesthetic appeal of a fence. A proposed new ASTM International specification will answer the need for better standardization of these privacy slats. ASTM WK36470 , Specification for Privacy Slats for Chain Link Fence, is being developed by Subcommittee F14.40 on Chain Link Fence and Wire Accessories ,…
-
ASTM International Committee F14 on Fences welcomes participation in the development of a proposed new standard, ASTM WK36054 , Guide for Anchoring Steel Fence and Gate Posts in Lieu of Concrete Footings. The proposed standard is under the jurisdiction of Subcommittee F14.15 on Other Fence Systems and Components . According to Ray Statz, chairman, Qual Line Fence Corp., and chairman of F14.15,…
-
Three primary factors define the success or failure of any attempt to forcibly penetrate a security fence system: the tools and devices employed, the number of aggressors and their level of sophistication. A newly approved ASTM International standard can be used to measure the resistance of fence systems to such an attempt. ASTM F2781 , Practice for Testing Forced Entry Resistance of Security…, ASTM Committee F14 Next Meeting:, Feb. 16, 2010 , in conjunction with American Fence Association, FENCETECH 2010, Orlando, Fla., Technical Contact:, Charles Naegele, P.E., Allied Consulting Inc., Clarks Summit, Pa., Phone: 570-586-7260; canaegele@aol.com, ASTM Staff Contact:, Thomas O’Toole, Phone: 610-832-9739; totoole@astm.org, ASTM PR Contact:, Barbara Schindler, Phone: 610-832-9603; bschindl@astm.org Release #8427/Dec2009
-
Mercury emissions from flue gases in coal-fired power plants are a large source of atmospheric mercury in the United States, but no standard for determination of mercury adsorption currently exists. One promising method of controlling these emissions involves the injection of powdered activated carbon into the flue gas. A proposed new ASTM International standard would evaluate the performance of…
-
A proposed new ASTM International practice will allow a wide variety of users to differentiate levels of effectiveness among the many types of security fence systems that currently exist. WK19721 , Practice for Evaluation of the Effectiveness of Different Types of Fence Systems, is under the jurisdiction of Subcommittee F14.50 on High Security Fences and Perimeter Barriers, part of ASTM…
-
A new ASTM International standard provides instructions for developing the chain-link fence design, layout and installation for a wide variety of sports and recreational facilities and other applications. The standard, F 2631 , Practice for Installation of Chain-Link Fence for Outdoor Sports Fields, Sports Courts and Other Recreation Facilities, was developed by Subcommittee F14.10 on Specific…
-
ASTM International Committee F14 on Fences is seeking a volunteer to head a task group that will develop a proposed new standard for temporary fences, WK14410 . The proposed new standard will be under the jurisdiction of Subcommittee F14.10 on Specific Applications. WK14410 will address several aspects of temporary fences, including safety, construction sites, crowd control, security and…