Search
Advanced search
Filter by category
Filter by committee
Search results
-
ASTM International’s autonomy design and operations in aviation administrative committee (AC377) is hosting the 2nd Annual ASTM Autonomy in Aviation Symposium, October 19, 2021, to be held at the Santa Clara Marriott (Santa Clara, California, USA). The objective of the symposium is to facilitate discussions on standards development for aviation autonomy while bringing forward perspectives from…, Media Inquiries:, Jaime Martorana, tel +1.610.832.9796; jmartorana@astm.org Release #11289 ###
-
A proposed ASTM International standard will provide test methods used to determine trace metal content in carbon black with ICP-OES (Inductively Coupled Plasma-Optical Emission Spectroscopy) or ICP-MS (Inductively Couples Plasma – Mass Spectrometry) after adequate digestion. ASTM’s committee on carbon black (D24) is developing the proposed standard (WK73324). “ICP test methods are a commonly used…, Media Inquiries:, Dan Bergels, tel +1.610.832.9602; dbergels@astm.org, Committee Contact:, Melissa Marcinowski, tel +1.610.832.9626; mmarcinowski@astm.org Release #11050 ###
-
Yesterday, more than 50 government and industry officials decided to launch a new ASTM International committee dedicated to developing standards in the area of commercial spaceflight. The Committee on Commercial Spaceflight (F47) will focus on standards development in areas such as occupant safety of orbital and suborbital vehicles, launch and reentry vehicles, and spaceports. James Thomas,…, Media Inquiries:, Dan Bergels, tel +1.610.832.9602; dbergels@astm.org, ASTM Staff Contact:, Kristy Straiton, tel +1.610.832.9640; kstraiton@astm.org Release #10195
-
With support from industry and government leaders, ASTM International will host an organizational meeting to potentially create a new technical committee that develops voluntary consensus standards for commercial spaceflight. This meeting comes in part as a result of the updated U.S. Commercial Space Launch Competitiveness Act of 2015 (CSLCA). The U.S. Federal Aviation Administration’s…, ASTM Commercial Spaceflight Meeting:, Oct. 24, 2016, RTCA, Inc.; 1150 18th St. NW, 4th Floor, Washington, DC 20036, Media Inquiries:, Dan Bergels, tel +1.610.832.9602; dbergels@astm.org, ASTM Staff Contact:, Christine DeJong, tel +1.610.832.9736; cdejong@astm.org Release #10170
-
ASTM International will hold an organizational meeting to potentially create a new technical committee that develops voluntary consensus standards for the recycled vulcanized rubber industry. This includes both rubber and carbon black and has many practical applications including use in plastics, strengthening concrete, and infill for playgrounds. This, online meeting, is Wednesday, October 5 2016, at 10:00am EDT. Industry stakeholders and other parties interested in charting a path towards standardization for this industry are welcome to attend. Consensus standards could set a bar for this growing industry resulting in high-quality practices and products used worldwide. The objectives of the meeting are to: • bring a range of industry experts together…, ASTM Recycled Vulcanized Rubber Meeting:, Wednesday, 5 October 2016 at 10:00am (Eastern); online (Webex) meeting, Media Inquiries:, Dan Bergels, tel +1.610.832.9602; dbergels@astm.org, ASTM Staff Contact:, Joe Koury, tel +1.610.832.9804; jkoury@astm.org Release #10165
-
ASTM Fence Committee Approves New Standards on Ornamental Aluminum Fencing and Polymer Privacy SlatsASTM International Committee F14 on Fences has recently approved two new standards: ASTM F2957 , Specification for Ornamental Aluminum Fence Systems; and ASTM F3000/F3000M , Specification for Polymer Privacy Insert Slats for Chain Link Fabric and Privacy Chain Link Fabric Manufactured Containing Pre-Installed Privacy Slats., Ornamental Aluminum Fence Systems, ASTM F2957 was developed by Subcommittee F14.35 on Architectural Metal Fence Systems. The new standard defines minimum selection criteria and test procedures to ensure product users that an ornamental aluminum fence system has sufficient strength to withstand reasonable loads and forces, and has the appropriate combination of material and organic coating surface protection to withstand effects of…, Polymer Privacy Insert Slats, ASTM F3000/F3000M is under the jurisdiction of Subcommittee F14.40 on Chain Link Fence and Wire Accessories . ASTM F3000/F3000M covers both inserted slats that are placed into chain link fabric after the fence has been installed as well as slats that are pre-inserted into chain link mesh during the link weaving process. According to William Ullrich, principal, Link Consulting LLC, and an F14…, ASTM Committee F14 Next Meeting:, June 25, 2013, ASTM International Headquarters, West Conshohocken, Pa., Technical Contact:, (ASTM F2957) Larry Burkholder, Digger Specialties Inc., Bremen, Ind., Phone: 574-546-5999; lburkholder@diggerspecialties.com; (ASTM F3000/F3000M) William Ullrich, Link Consulting LLC, Annapolis, Md., Phone: 410-849-2610; bullrich.link@comcast.net , ASTM Staff Contact:, Thomas O’Toole, Phone: 610-832-9739; totoole@astm.org , ASTM PR Contact:, Barbara Schindler, Phone: 610-832-9603; bschindl@astm.org Release #9375
-
Slats inserted into chain link fences can provide up to 95 percent more privacy and enhance the aesthetic appeal of a fence. A proposed new ASTM International specification will answer the need for better standardization of these privacy slats. ASTM WK36470 , Specification for Privacy Slats for Chain Link Fence, is being developed by Subcommittee F14.40 on Chain Link Fence and Wire Accessories ,…
-
ASTM International Committee F14 on Fences welcomes participation in the development of a proposed new standard, ASTM WK36054 , Guide for Anchoring Steel Fence and Gate Posts in Lieu of Concrete Footings. The proposed standard is under the jurisdiction of Subcommittee F14.15 on Other Fence Systems and Components . According to Ray Statz, chairman, Qual Line Fence Corp., and chairman of F14.15,…
-
New regulations set forth by the U.S. Environmental Protection Agency to mandate greenhouse gas reporting in the U.S. carbon black industry have led to the development of a new ASTM International standard, ASTM D7662 , Test Method for Carbon Content in Carbon Black Feedstock Oils. ASTM D7662 is under the jurisdiction of Subcommittee D24.66 on Environment, Health and Safety, part of ASTM…
-
The U.S. Environmental Protection Agency has set forth new regulations that mandate greenhouse gas reporting in the U.S. carbon black industry. These regulations were the impetus for the development of a new ASTM International standard, ASTM D7633 , Test Method for Carbon Black Carbon Content. The new standard was developed by Subcommittee D24.66 on Environment, Health and Safety, part of ASTM…, ASTM Committee D24 Next Meeting:, Dec. 6-8, December Committee Week, New Orleans, La., Technical Contact:, George Joyce, Columbian Chemicals Co., Marietta, Ga., Phone: 770-792-9467; gjoyce@columbianchemicals.com, ASTM Staff Contact:, Joe Koury, Phone: 610-832-9804; jkoury@astm.org, ASTM PR Contact:, Barbara Schindler, Phone: 610-832-9603; bschindl@astm.org Release #8641