Search
Advanced search
Filter by category
Filter by committee
Search results
-
A newly proposed standard from, ASTM International’s aircraft systems committee ( F39 ) will cover the design of hybrid-electric powerplants and engines. “This proposed standard is intended to support companies that are creating hybrid-electric power generation systems for use as the primary source of electrical propulsive power in electric aircraft,” says ASTM member David Eichstedt. “They will benefit from a more clearly-…, , Media Inquiries:, Dan Bergels, tel +1.610.832.9602; dbergels@astm.org, Committee Contact:, Joe Koury, tel +1.610.832.9804; jkoury@astm.org Release #11551 ###
-
ASTM International’s 3D imaging systems committee ( E57 ) is developing a proposed standard that will provide guidance for robotic bin-picking systems used for sorting, assembling, and packaging items in industrial environments. “Robotic bin-picking systems are becoming popular in many industrial applications,” says ASTM committee E57 vice-chair Kamel Saidi, Ph.D. “These systems are used for…
-
ASTM International’s geosynthetics committee ( D35 ) has approved a new standard that will help engineers, designers, and specifiers who work with vinyl sheet piling. Applications for such piling include the construction of seawalls, retaining walls, and chemical cut-off walls. “The new specification will standardize the materials used and it will allow producers to meet the United States Army…
-
ASTM International’s geosynthetics committee ( D35 ) is developing a proposed standard that will help provide engineers with specific information for components necessary for road and pavement design. The proposed standard ( WK70888 ) outlines a commonly used test to characterize the performance of geosynthetics for roadway applications. Specifically, it describes the use of the cyclic plate load…
-
ASTM International’s autonomy design and operations in aviation administrative committee (AC377) is hosting the 2nd Annual ASTM Autonomy in Aviation Symposium, October 19, 2021, to be held at the Santa Clara Marriott (Santa Clara, California, USA). The objective of the symposium is to facilitate discussions on standards development for aviation autonomy while bringing forward perspectives from…, Media Inquiries:, Jaime Martorana, tel +1.610.832.9796; jmartorana@astm.org Release #11289 ###
-
ASTM International’s geosynthetics committee ( D35 ) is developing a proposed standard that covers vinyl sheet piling used in marine and geotechnical fields for seawalls, retaining walls, flood walls, erosion control, and pollution cut-off. According to ASTM member Steve Hargrave, the proposed standard ( WK75165 ) will fill the need for a specification for vinyl sheet piling used for structural…, Media Inquiries:, Jaime Martorana, tel +1.610.832.9796; jmartorana@astm.org , Committee Contact:, Travis Murdock, tel +1.610.832.9826; tmurdock@astm.org Release #11185 ###
-
A new ASTM International standard aid engineers and specifiers looking to understand the quality and strength of cement contained in geosynthetic cementitious composite mats (GCCMs). ASTM’s geosynthetics committee developed the new standard, which is needed to allow for a consistent industry method for the application of compression strength in GCCMs. GCCMs are flexible concrete impregnated…, Media Inquiries:, Dan Bergels, tel +1.610.832.9602; dbergels@astm.org, Committee Contact:, Katerina Koperna, tel +1.610.832.9728; kkoperna@astm.org Release #11045 ###
-
Today, global standards developer ASTM International announced the publication of a new technical report on aviation. The report, “Developmental Pillars of Increased Autonomy for Aircraft Systems”, was developed by ASTM’s autonomy design and operations in aviation administrative committee (AC377). The new report is intended to promote the sound application of technical best practices to increase…, Media Inquiries, : Dan Bergels, tel +1.610.832.9602; dbergels@astm.org Release #11054 ###
-
A proposed ASTM International standard is intended to focus on robotic assembly applications. ASTM’s 3D imaging systems committee ( E57 ) is developing the proposed standard ( WK72962 ), which should be the first in a series of standards on 3D, or depth perception, systems. According to ASTM International member John Sweetser, principal engineer, Intel Corp/Realsense Group, there are currently…, Media Inquiries:, Dan Bergels, tel +1.610.832.9602; dbergels@astm.org, Committee Contact:, Pat Picariello, tel +1.610.832.9720; ppicariello@astm.org Release #11033 ###
-
A proposed ASTM International standard will provide guidance for using geocells – open-celled geosynthetics that help hold soils and rocks in place – in roadway projects. Geocells are commonly used in road construction, earth retention, and other construction projects. According to ASTM International member Eli Cuelho, there is currently no standard for using geocells in geotechnical and…, Media Inquiries:, Dan Bergels, tel +1.610.832.9602; dbergels@astm.org, Committee Contact:, Katerina Koperna, tel +1.610.832.9728; kkoperna@astm.org Release #10955