Search
Advanced search
Filter by category
Filter by committee
Search results
-
ASTM International’s engine coolants and related fluids committee ( D15 ) has approved a new test method that will be used to determine common organic additives in engine coolants. The new standard ( D8567 ) describes how high-performance liquid chromatography (HPLC) is used to analyze engine coolants for azoles and organic acids, which can affect performance. According to Henry Owusu, chair of…, Media Inquiries:, Gavin O’Reilly, tel +1.610.832.9618; goreilly@astm.org, Committee Contact:, Ashley Wiand, tel +1.610.832.9551; awiand@astm.org Release #11831 ###
-
ASTM International’s engine coolants and related fluids committee ( D15 ) is developing two proposed standards that will be used to evaluate the ability of electric vehicle (EV) coolants to protect against corrosion. Coolants help regulate operating temperatures while providing protection against corrosion, freezing, and overheating. Coolants can come directly in contact with the vehicle fuel…, Media Inquiries:, Gavin O’Reilly, tel +1.610.832.9618; goreilly@astm.org, Committee Contact:, Ashley Wiand, tel +1.610.832.9551; awiand@astm.org Release #11702 ###
-
In light of COVID-19 (coronavirus) and ongoing safety concerns for members and staff, ASTM International announced today that all previously scheduled in-person May standards development meetings (including independent meetings) have been canceled. Earlier this month, ASTM International announced the cancellation of all April in-person meetings . These decisions were based on several factors,…, Media Inquiries:, Dan Bergels, tel +1.610.832.9602; dbergels@astm.org Release #11001 ###
-
A new ASTM International specification supports the use of waterless coolants in car engines. Waterless coolants avoid the creation of water vapor pockets that can interrupt heat transfer from critical areas of an engine, helping prevent engine damage, enhance consumer safety, and more. According to ASTM International member Jonathan T. Light, non-aqueous engine coolants that conform to the new…, ASTM Committee D15 on Engine Coolants and Related Fluids Next Meeting:, May 17-18, 2017, Phoenix, Ariz., Media Inquiries:, Dan Bergels, tel +1.610.832.9602; dbergels@astm.org, Technical Contact:, Jonathan T. Light, Evans Cooling Systems, Inc., Suffield, Conn., tel +1.860.435.2418; jtlight@comcast.net, ASTM Staff Contact:, Ashley Wiand, tel +1.610.832.9551; awiand@astm.org Release #10255
-
A new ASTM International standard for heat transfer fluids will help create more efficient heating and air conditioning systems. The new standard (soon to be published as D8039, Specification for Freeze Point Depressed Heating and Air Conditioning (HVAC) Heat Transfer Fluids (HTF)) was developed by ASTM’s Committee on Engine Coolants and Related Fluids ( D15 ). Heat transfer fluids used in the…, D15 on Engine Coolants and Related Fluids Future Meeting:, Oct. 19-20, Dearborn, Michigan, Media Inquiries:, Dan Bergels, tel +1.610.832.9602; dbergels@astm.org, Technical Contact:, Edward R. Eaton Sr., Amalgatech, Phoenix, Ariz., tel +1.602.252.0280; edeaton@amalgatech.com , ASTM Staff Contact:, Ashley Wiand, tel +1.610.832.9551; awiand@astm.org Release #10188
-
Attendees of the Annual Reciprocal Meat Conference (RMC) are welcome to attend an informational session hosted by ASTM International Committee F10 on Livestock, Meat, and Poultry Evaluation Systems . The session, regarding ASTM and the history of Committee F10, will be held in San Angelo, Texas on June 21, 2016. For conference information and registration, please visit the American Meat Science…, ASTM Staff Contact:, Kelly Ann Paul, tel +1.610.832.9745; kpaul@astm.org Release #10070
-
ASTM Fence Committee Approves New Standards on Ornamental Aluminum Fencing and Polymer Privacy SlatsASTM International Committee F14 on Fences has recently approved two new standards: ASTM F2957 , Specification for Ornamental Aluminum Fence Systems; and ASTM F3000/F3000M , Specification for Polymer Privacy Insert Slats for Chain Link Fabric and Privacy Chain Link Fabric Manufactured Containing Pre-Installed Privacy Slats., Ornamental Aluminum Fence Systems, ASTM F2957 was developed by Subcommittee F14.35 on Architectural Metal Fence Systems. The new standard defines minimum selection criteria and test procedures to ensure product users that an ornamental aluminum fence system has sufficient strength to withstand reasonable loads and forces, and has the appropriate combination of material and organic coating surface protection to withstand effects of…, Polymer Privacy Insert Slats, ASTM F3000/F3000M is under the jurisdiction of Subcommittee F14.40 on Chain Link Fence and Wire Accessories . ASTM F3000/F3000M covers both inserted slats that are placed into chain link fabric after the fence has been installed as well as slats that are pre-inserted into chain link mesh during the link weaving process. According to William Ullrich, principal, Link Consulting LLC, and an F14…, ASTM Committee F14 Next Meeting:, June 25, 2013, ASTM International Headquarters, West Conshohocken, Pa., Technical Contact:, (ASTM F2957) Larry Burkholder, Digger Specialties Inc., Bremen, Ind., Phone: 574-546-5999; lburkholder@diggerspecialties.com; (ASTM F3000/F3000M) William Ullrich, Link Consulting LLC, Annapolis, Md., Phone: 410-849-2610; bullrich.link@comcast.net , ASTM Staff Contact:, Thomas O’Toole, Phone: 610-832-9739; totoole@astm.org , ASTM PR Contact:, Barbara Schindler, Phone: 610-832-9603; bschindl@astm.org Release #9375
-
An important ASTM engine coolant standard, ASTM D3321 , Test Method for Use of the Refractometer for Field Test Determination of the Freezing Point of Aqueous Engine Coolants, has recently been revised to reflect advances in engine coolant technology used in modern engines. ASTM D3321 is under the jurisdiction of Subcommittee D15.03 on Physical Properties , part of ASTM International Committee…, ASTM Committee D15 Next Meeting:, May 21-22, 2013, May Committee Week, Indianapolis, Ind., Technical Contact:, Frederick C. Alverson, Shell Global Solutions, Houston, Texas, Phone: 281-544-9217; frederick.alverson@shell.com, ASTM Staff Contact:, Joe Koury, Phone: 610-832-9804; jkoury@astm.org, ASTM PR Contact:, Barbara Schindler, Phone: 610-832-9603; bschindl@astm.org R elease #9274
-
Slats inserted into chain link fences can provide up to 95 percent more privacy and enhance the aesthetic appeal of a fence. A proposed new ASTM International specification will answer the need for better standardization of these privacy slats. ASTM WK36470 , Specification for Privacy Slats for Chain Link Fence, is being developed by Subcommittee F14.40 on Chain Link Fence and Wire Accessories ,…
-
Low frequency radio frequency identification transponders have become a common means of acquiring data at livestock collection points, such as markets, feed yards and packing plants. However, there are currently multiple LF RFID technologies that exist in the marketplace, the LF RFID Half Duplex and LF RFID Full Duplex technologies. In response, ASTM International Committee F10 on Livestock, Meat…, ASTM Committee F10 Next Meeting:, April 18-19, 2012, April Committee Week, Phoenix, Ariz., Technical Contact:, Bryan Rickard, Micro Beef Technologies Ltd., Amarillo, Texas, Phone: 806-372-2369; brickard@microbeef.com, ASTM Staff Contact:, Kelly Paul, Phone: 610-832-9745; kpaul@astm.org, ASTM PR Contact:, Barbara Schindler, Phone: 610-832-9603; bschindl@astm.org R elease #9136