Search
Advanced search
Filter by category
Filter by committee
Search results
-
ASTM International’s committee on textiles ( D13 ) is developing a proposed standard for writing terminology in textile standards. “This practice is intended to address the importance of a ‘critical building block’ that is used to develop and construct a standard that has value and utility for many years,” says ASTM International member Vince Diaz. “If the terminology is vague or ambiguous, the…, Media Inquiries:, Gavin O’Reilly, tel +1.610.832.9618; goreilly@astm.org, Committee Contact:, Nora Nimmerichter, tel +1.610.832.9815; nnimmerichter@astm.org Release #11656 ###
-
ASTM International’s homeland security applications committee ( E54 ) has published three standards that are designed to assess the performance of protective equipment used by law enforcement officers. These standards cover public order helmets (E3342); ballistic-resistant shields (E3347); and ballistic-resistant helmets (E3368). In addition to publishing the standards, ASTM has established a…, Media Inquiries:, Dan Bergels, tel +1.610.832.9602; dbergels@astm.org, Committee Contact:, Kevin Shanahan, tel +1.610.832.9660 ; kshanahan@astm.org Release #11630 ###
-
ASTM International announced today the Journal of Testing and Evaluation, the organization’s flagship journal, received an increased 2021 impact factor rating of 1.333, up 5.5% from the previous year. The impact factor is calculated each year by Clarivate Analytics and given to journals that appear in their database, Science Citation Index. Launched in 1973, the journal is a multi-disciplinary…, Media Inquiries:, Dan Bergels, tel +1.610.832.9602; dbergels@astm.org Release #11472 ###
-
ASTM International’s geosynthetics committee ( D35 ) has approved a new standard that will help engineers, designers, and specifiers who work with vinyl sheet piling. Applications for such piling include the construction of seawalls, retaining walls, and chemical cut-off walls. “The new specification will standardize the materials used and it will allow producers to meet the United States Army…
-
ASTM International’s geosynthetics committee ( D35 ) is developing a proposed standard that will help provide engineers with specific information for components necessary for road and pavement design. The proposed standard ( WK70888 ) outlines a commonly used test to characterize the performance of geosynthetics for roadway applications. Specifically, it describes the use of the cyclic plate load…
-
A proposed ASTM International standard test method will cover the determination of maturity, fineness, ribbon width, and specific surface area (micronaire) of cotton fibers. ASTM International’s textiles committee ( D13 ) is developing the proposed standard. This test method ( WK75782 ) focuses on cotton fibers from a loose, chemically untreated sample taken before harvest, during ginning,…, Media Inquiries:, Jaime Martorana, tel +1.610.832.9796; jmartorana@astm.org, Committee Contact:, Nora Nimmerichter, tel +1.610.832.9815; nnimmerichter@astm.org Release #11267 ###
-
ASTM International’s geosynthetics committee ( D35 ) is developing a proposed standard that covers vinyl sheet piling used in marine and geotechnical fields for seawalls, retaining walls, flood walls, erosion control, and pollution cut-off. According to ASTM member Steve Hargrave, the proposed standard ( WK75165 ) will fill the need for a specification for vinyl sheet piling used for structural…, Media Inquiries:, Jaime Martorana, tel +1.610.832.9796; jmartorana@astm.org , Committee Contact:, Travis Murdock, tel +1.610.832.9826; tmurdock@astm.org Release #11185 ###
-
A new ASTM International standard aid engineers and specifiers looking to understand the quality and strength of cement contained in geosynthetic cementitious composite mats (GCCMs). ASTM’s geosynthetics committee developed the new standard, which is needed to allow for a consistent industry method for the application of compression strength in GCCMs. GCCMs are flexible concrete impregnated…, Media Inquiries:, Dan Bergels, tel +1.610.832.9602; dbergels@astm.org, Committee Contact:, Katerina Koperna, tel +1.610.832.9728; kkoperna@astm.org Release #11045 ###
-
A proposed ASTM International standard will help define baseline performance requirements for ballistic-resistant barriers, panels, or structures that are used to protect against complete penetration of projectiles from small arms. ASTM’s homeland security committee ( E54 ) is developing the proposed standard ( WK63319 ), which focuses on items such as rigid or flexible barriers, panels, or…, Media Inquiries:, Dan Bergels, tel +1.610.832.9602; dbergels@astm.org, Committee Contact:, Mary Mikolajewski, tel +1.610.832.9678; mmikolajewski@astm.org Release #11006 ###
-
A proposed ASTM International standard will be used to assess helmets and face shields worn by law enforcement officers. ASTM’s homeland security committee ( E54 ) is developing the proposed standard ( WK72061) . According to ASTM International member Casandra Robinson, U.S. National Institute of Standards and Technology, the proposed standard specifies performance requirements, conditioning…, Media Inquiries:, Dan Bergels, tel +1.610.832.9602; dbergels@astm.org, Committee Contact:, Mary Mikolajewski, tel +1.610.832.9678; mmikolajewski@astm.org Release #11004 ###