Search
Advanced search
Filter by category
Filter by committee
Search results
-
A new ASTM International standard will provide a specification for low density poly vinylidene fluoride (PVDF) based materials intended for use in wire and cable jacketing. ASTM’s committee on electrical and electronic insulating materials (D09) developed the standard, which will be soon published as D8318. Low density PVDF cable jacketing is a new product that has the potential to offer…, Media Inquiries:, Dan Bergels, tel +1.610.832.9602; dbergels@astm.org, Committee Contact:, Alyson Fick, tel +610.832.9710; afick@astm.org Release #11058 ###
-
In light of COVID-19 (coronavirus) and growing safety concerns for members and staff, ASTM International announced today that previously scheduled April standards development meetings in Boston (March 29-April 3) and Prague (April 27-30) have been canceled. The decision was based on several factors, including, but not limited to: Continued review of information and recommendations from the U.S.…, Media Inquiries:, Dan Bergels, tel +1.610.832.9602; dbergels@astm.org Release #10993
-
ASTM International’s Committee D09 (Electrical and Electronic Insulating Materials) invites anyone to join in developing a new standard to help maintain the integrity of cables during an emergency such as a fire. Specifically, the proposed standard (WK52230, Test Method for Determination of Acid Gas Content of Wire and Cable Insulation or Jacket Material) will help determine the halogen content…, ASTM Committee D09 Next Meeting:, April 14-15, 2016, April Committee Week, San Antonio, Texas, Media Inquiries:, Nathan Osburn, tel +1.610.832.9603; nosburn@astm.org, Technical Contact:, Larry Ingram, Williamsport, Pa., tel +1.570.916.8448; larry77151@comcast.net , ASTM Staff Contact:, Katerina Koperna, tel +1.610.832.9728; kkoperna@astm.org Release #9960
-
Activated carbon is processed to have small, low-volume pores that increase the surface area available for adsorption. It has applications in the medical, environmental and energy realms, among others. Since 1962, ASTM International Committee D28 on Activated Carbon has developed standards that play a pre-eminent role in how activated carbon is used. A D28 subcommittee, D28.02 on Liquid Phase…, WK47401, Xylenol Orange Dye, The xylenol orange dye test is a way to determine the relative adsorption rate of unused or reactivated carbons by adsorption of xylenol orange from aqueous solution. This is an important means for deciding which type of activated carbon to use to a specific water treatment application. “Activated carbon performance can roughly be defined as a combination of the ability to adsorb a particular…, WK47421, Particle Size Distribution, Mercury flue gas, home water filters and potable water treatment are the main applications in which powdered and fine mesh carbons are used. A proposed new test method will describe how a laser light scattering technique can determine the particle size distribution of fine mesh activated carbon. ASTM member Neal Megonnell, vice president, sales and marketing, Haycarb USA, says the proposed test…, ASTM Committee D28 Next Meeting:, April 27, April Committee Week, Anaheim, Calif., Technical Contact:, (WK47401) Adam Redding, Ph.D., Evoqua Water Technologies LLC, Northwest, Pa., tel +1.724.719.0805; adam.redding@evoqua.com and (WK47421) Neal E. Megonnell, Haycarb USA, Pittsburgh, Pa., tel +1.412.709.7487; neal@haycarbusa.com, ASTM Staff Contact:, Kelly Paul, tel +1.610.832.9745; kpaul@astm.org, ASTM PR Contact:, Barbara Schindler, tel +1.610.832.9603; bschindl@astm.org Release #9731
-
ASTM International Committee F41 on Unmanned Maritime Vehicle Systems will meet on Aug. 17, 2011, at the Walter E. Washington Convention Center in Washington, D.C. The meeting will take place in conjunction with the AUVSI Unmanned Systems North American 2011 Conference. The F41 executive subcommittee meeting will begin at 7:00 a.m. on Aug. 17. in room 149A. In addition, all interested parties are…
-
Mercury emissions from flue gases in coal-fired power plants are a large source of atmospheric mercury in the United States, but no standard for determination of mercury adsorption currently exists. One promising method of controlling these emissions involves the injection of powdered activated carbon into the flue gas. A proposed new ASTM International standard would evaluate the performance of…
-
ASTM International Committee F41 on Unmanned Undersea Vehicle Systems invites all interested parties to participate in a new task group, F41.90.01 on Unmanned Surface Vehicles. With the addition of this new task group, the name of Committee F41 will be changed to Unmanned Maritime Systems. Task Group F41.90.01 is seeking new members with expertise in unmanned surface vehicles to complement the…
-
An ASTM International task group on battery separator materials is currently working on the latest in a series of standards being developed for alkaline battery separators. The proposed new standard, WK13587 , Test Methods for Sampling and Testing Materials That Are Used for Alkaline Battery Separators, is under the jurisdiction of Subcommittee D09.19 on Dielectric Sheet and Roll Products, which…
-
, New ASTM Committee to Develop Standards That Will Facilitate New System Designs and Industry Growth, ASTM International, one of the largest voluntary standards development organizations (SDOs) in the world, today announced the formation of ASTM Committee F41 on Unmanned Undersea Vehicle (UUV) Systems. This important standards initiative was driven by the cooperative efforts of the United States Navy and UUV industry stakeholders to facilitate new UUV system designs and enable next-generation…, Critical Role in Oceanographic Research, Commercial and Military Applications, UUVs have a notable history dating back to the early 1980s. Early systems built on their manned submersible predecessors and helped transform oceanographic research during the decade. Used by the academic community in notable deep-sea expeditions, such as the discovery and exploration of the wreck of the Titanic, UUVs have played a critical role in ocean surveying, environmental monitoring, and…, UUV Growth and Evolution: ASTM Standards Will Help Lead the Way, Todays UUV industry includes two classes of systems: remotely operated vehicles (ROVs), which are attached to a mother-ship by a long cable; and autonomous underwater vehicles (AUVs), which operate without a tether. To better meet the challenges of emerging applications, existing UUV systems must evolve with new technology. Specific areas of need include greater interoperability among…, Fast and Efficient Standards Development Through the ASTM Process, Led by the Association for Unmanned Vehicle Systems International (AUVSI), the premier trade association for the unmanned systems industry, UUV stakeholders selected ASTM International as the SDO best suited for the development of new international industry standards. With a proven consensus process and state-of-the-art standards development infrastructure, ASTM International was best positioned…, Public/Private Sector Collaboration under the ASTM Umbrella, ASTM Committee F41 is another example of the long-standing partnership between the public and private sectors in developing consensus standards under the ASTM International process. F41 brings together technical experts from the UUV industry, federal government, trade associations and academia to develop voluntary consensus standards pertaining to UUV design, safety and performance including…
-
Two newly approved ASTM standards are filling a gap that has existed for tests for battery separators. The new standards, D 7129, Test Method for Determination of Ammonia Trapping in a Grafted Battery Separator, and D 7131, Test Method for Determination of Ion Exchange Capacity (IEC) in a Grafted Battery Separator, are under the jurisdiction of Subcommittee D09.19 on Dielectric Sheet and Roll…