Search
Advanced search
Filter by category
Filter by committee
Search results
-
ASTM International’s engine coolants and related fluids committee ( D15 ) has approved a new test method that will be used to determine common organic additives in engine coolants. The new standard ( D8567 ) describes how high-performance liquid chromatography (HPLC) is used to analyze engine coolants for azoles and organic acids, which can affect performance. According to Henry Owusu, chair of…, Media Inquiries:, Gavin O’Reilly, tel +1.610.832.9618; goreilly@astm.org, Committee Contact:, Ashley Wiand, tel +1.610.832.9551; awiand@astm.org Release #11831 ###
-
ASTM International’s engine coolants and related fluids committee ( D15 ) is developing two proposed standards that will be used to evaluate the ability of electric vehicle (EV) coolants to protect against corrosion. Coolants help regulate operating temperatures while providing protection against corrosion, freezing, and overheating. Coolants can come directly in contact with the vehicle fuel…, Media Inquiries:, Gavin O’Reilly, tel +1.610.832.9618; goreilly@astm.org, Committee Contact:, Ashley Wiand, tel +1.610.832.9551; awiand@astm.org Release #11702 ###
-
A new ASTM International standard will provide a specification for low density poly vinylidene fluoride (PVDF) based materials intended for use in wire and cable jacketing. ASTM’s committee on electrical and electronic insulating materials (D09) developed the standard, which will be soon published as D8318. Low density PVDF cable jacketing is a new product that has the potential to offer…, Media Inquiries:, Dan Bergels, tel +1.610.832.9602; dbergels@astm.org, Committee Contact:, Alyson Fick, tel +610.832.9710; afick@astm.org Release #11058 ###
-
In light of COVID-19 (coronavirus) and ongoing safety concerns for members and staff, ASTM International announced today that all previously scheduled in-person May standards development meetings (including independent meetings) have been canceled. Earlier this month, ASTM International announced the cancellation of all April in-person meetings . These decisions were based on several factors,…, Media Inquiries:, Dan Bergels, tel +1.610.832.9602; dbergels@astm.org Release #11001 ###
-
In light of COVID-19 (coronavirus) and growing safety concerns for members and staff, ASTM International announced today that previously scheduled April standards development meetings in Boston (March 29-April 3) and Prague (April 27-30) have been canceled. The decision was based on several factors, including, but not limited to: Continued review of information and recommendations from the U.S.…, Media Inquiries:, Dan Bergels, tel +1.610.832.9602; dbergels@astm.org Release #10993
-
A new ASTM International specification supports the use of waterless coolants in car engines. Waterless coolants avoid the creation of water vapor pockets that can interrupt heat transfer from critical areas of an engine, helping prevent engine damage, enhance consumer safety, and more. According to ASTM International member Jonathan T. Light, non-aqueous engine coolants that conform to the new…, ASTM Committee D15 on Engine Coolants and Related Fluids Next Meeting:, May 17-18, 2017, Phoenix, Ariz., Media Inquiries:, Dan Bergels, tel +1.610.832.9602; dbergels@astm.org, Technical Contact:, Jonathan T. Light, Evans Cooling Systems, Inc., Suffield, Conn., tel +1.860.435.2418; jtlight@comcast.net, ASTM Staff Contact:, Ashley Wiand, tel +1.610.832.9551; awiand@astm.org Release #10255
-
A new ASTM International standard for heat transfer fluids will help create more efficient heating and air conditioning systems. The new standard (soon to be published as D8039, Specification for Freeze Point Depressed Heating and Air Conditioning (HVAC) Heat Transfer Fluids (HTF)) was developed by ASTM’s Committee on Engine Coolants and Related Fluids ( D15 ). Heat transfer fluids used in the…, D15 on Engine Coolants and Related Fluids Future Meeting:, Oct. 19-20, Dearborn, Michigan, Media Inquiries:, Dan Bergels, tel +1.610.832.9602; dbergels@astm.org, Technical Contact:, Edward R. Eaton Sr., Amalgatech, Phoenix, Ariz., tel +1.602.252.0280; edeaton@amalgatech.com , ASTM Staff Contact:, Ashley Wiand, tel +1.610.832.9551; awiand@astm.org Release #10188
-
ASTM International’s Committee D09 (Electrical and Electronic Insulating Materials) invites anyone to join in developing a new standard to help maintain the integrity of cables during an emergency such as a fire. Specifically, the proposed standard (WK52230, Test Method for Determination of Acid Gas Content of Wire and Cable Insulation or Jacket Material) will help determine the halogen content…, ASTM Committee D09 Next Meeting:, April 14-15, 2016, April Committee Week, San Antonio, Texas, Media Inquiries:, Nathan Osburn, tel +1.610.832.9603; nosburn@astm.org, Technical Contact:, Larry Ingram, Williamsport, Pa., tel +1.570.916.8448; larry77151@comcast.net , ASTM Staff Contact:, Katerina Koperna, tel +1.610.832.9728; kkoperna@astm.org Release #9960
-
ASTM Fence Committee Approves New Standards on Ornamental Aluminum Fencing and Polymer Privacy SlatsASTM International Committee F14 on Fences has recently approved two new standards: ASTM F2957 , Specification for Ornamental Aluminum Fence Systems; and ASTM F3000/F3000M , Specification for Polymer Privacy Insert Slats for Chain Link Fabric and Privacy Chain Link Fabric Manufactured Containing Pre-Installed Privacy Slats., Ornamental Aluminum Fence Systems, ASTM F2957 was developed by Subcommittee F14.35 on Architectural Metal Fence Systems. The new standard defines minimum selection criteria and test procedures to ensure product users that an ornamental aluminum fence system has sufficient strength to withstand reasonable loads and forces, and has the appropriate combination of material and organic coating surface protection to withstand effects of…, Polymer Privacy Insert Slats, ASTM F3000/F3000M is under the jurisdiction of Subcommittee F14.40 on Chain Link Fence and Wire Accessories . ASTM F3000/F3000M covers both inserted slats that are placed into chain link fabric after the fence has been installed as well as slats that are pre-inserted into chain link mesh during the link weaving process. According to William Ullrich, principal, Link Consulting LLC, and an F14…, ASTM Committee F14 Next Meeting:, June 25, 2013, ASTM International Headquarters, West Conshohocken, Pa., Technical Contact:, (ASTM F2957) Larry Burkholder, Digger Specialties Inc., Bremen, Ind., Phone: 574-546-5999; lburkholder@diggerspecialties.com; (ASTM F3000/F3000M) William Ullrich, Link Consulting LLC, Annapolis, Md., Phone: 410-849-2610; bullrich.link@comcast.net , ASTM Staff Contact:, Thomas O’Toole, Phone: 610-832-9739; totoole@astm.org , ASTM PR Contact:, Barbara Schindler, Phone: 610-832-9603; bschindl@astm.org Release #9375
-
An important ASTM engine coolant standard, ASTM D3321 , Test Method for Use of the Refractometer for Field Test Determination of the Freezing Point of Aqueous Engine Coolants, has recently been revised to reflect advances in engine coolant technology used in modern engines. ASTM D3321 is under the jurisdiction of Subcommittee D15.03 on Physical Properties , part of ASTM International Committee…, ASTM Committee D15 Next Meeting:, May 21-22, 2013, May Committee Week, Indianapolis, Ind., Technical Contact:, Frederick C. Alverson, Shell Global Solutions, Houston, Texas, Phone: 281-544-9217; frederick.alverson@shell.com, ASTM Staff Contact:, Joe Koury, Phone: 610-832-9804; jkoury@astm.org, ASTM PR Contact:, Barbara Schindler, Phone: 610-832-9603; bschindl@astm.org R elease #9274