Search
Advanced search
Filter by category
Filter by committee
Search results
-
ASTM International’s hazardous substances and oil spill response committee ( F20 ) has approved two new standards that will each enhance knowledge essential for oil spill response. The new standards will be used primarily by oil laboratories. “The new standards describe measures designed to answer the question of how sticky oil is ( F3633 ) and how to make standard mixtures of weathered, or…, Media Inquiries:, Gavin O’Reilly, tel +1.610.832.9618; goreilly@astm.org, Committee Contact:, Travis Murdock, tel +1.610.832.9826; tmurdock@astm.org l Release #11655 ###
-
A new ASTM International standard will aid in the recycling or safe disposal of solar photovoltaic modules that have reached their end-of-life due to failure, underperformance, or breakage resulting from extreme weather. ASTM International’s committee on solar, geothermal, and other alternative energy sources ( E44 ) developed the new standard, soon to be published as E3325. Photovoltaic modules…
-
A new ASTM International standard will provide a specification for low density poly vinylidene fluoride (PVDF) based materials intended for use in wire and cable jacketing. ASTM’s committee on electrical and electronic insulating materials (D09) developed the standard, which will be soon published as D8318. Low density PVDF cable jacketing is a new product that has the potential to offer…, Media Inquiries:, Dan Bergels, tel +1.610.832.9602; dbergels@astm.org, Committee Contact:, Alyson Fick, tel +610.832.9710; afick@astm.org Release #11058 ###
-
In light of COVID-19 (coronavirus) and growing safety concerns for members and staff, ASTM International announced today that previously scheduled April standards development meetings in Boston (March 29-April 3) and Prague (April 27-30) have been canceled. The decision was based on several factors, including, but not limited to: Continued review of information and recommendations from the U.S.…, Media Inquiries:, Dan Bergels, tel +1.610.832.9602; dbergels@astm.org Release #10993
-
A new ASTM International standard could help both with contingency planning for oil spills as well as management of oil spills. According to ASTM International member Merv Fingas, the new guide standardizes the way laboratories both prepare and measure “weathered oil,” which is naturally different from the “source oil” at a facility. “This is important because, after an oil spill occurs, the…, Media Inquiries:, Dan Bergels, tel +1.610.832.9602; dbergels@astm.org, Committee Contact:, Travis Murdock, tel +1.610.832.9826; tmurdock@astm.org Release #10771
-
A new ASTM International specification will help thermal-heat meter manufacturers better standardize accuracy of their products. The “specification for equipment and instrumentation of heat metering technologies” (soon to be published as E3137) was developed by ASTM International’s committee on solar, geothermal, and other alternative energy sources ( E44 ). The development of the standard was…, Media Inquiries:, Dan Bergels, tel +1.610.832.9602; dbergels@astm.org, Committee Contact:, Kristy Straiton, tel +1.610.832.9640; kstraiton@astm.org Release #10445
-
ASTM International’s Committee D09 (Electrical and Electronic Insulating Materials) invites anyone to join in developing a new standard to help maintain the integrity of cables during an emergency such as a fire. Specifically, the proposed standard (WK52230, Test Method for Determination of Acid Gas Content of Wire and Cable Insulation or Jacket Material) will help determine the halogen content…, ASTM Committee D09 Next Meeting:, April 14-15, 2016, April Committee Week, San Antonio, Texas, Media Inquiries:, Nathan Osburn, tel +1.610.832.9603; nosburn@astm.org, Technical Contact:, Larry Ingram, Williamsport, Pa., tel +1.570.916.8448; larry77151@comcast.net , ASTM Staff Contact:, Katerina Koperna, tel +1.610.832.9728; kkoperna@astm.org Release #9960
-
A new ASTM International standard will help oil spill responders evaluate the stability of water-in-oil mixtures. Specifically, the new standard (soon to be published as F3045, Test Method for the Evaluation of the Stability of Water-in-Oil Mixtures Formed from Crude Oil and Petroleum Products Mixed with Saline Water) provides a laboratory test method to determine the tendencies of emulsions and…, ASTM Committee F20 on Hazardous Substances and Oil Spill Response Next Meeting, : Oct. 25-26, 2016, October Committee Week, Orlando, Fla., Media Inquiries:, Nathan Osburn, tel +1.610.832.9603; nosburn@astm.org, Technical Contact:, Mervin Fingas, Edmonton, Alberta, Canada, tel +1.780.989.6059; fingasmerv@shaw.ca , ASTM Staff Contact:, Jeffrey Adkins, tel +1.610.832.9738; jadkins@astm.org Release #9936
-
ASTM International published a new standard that provides an important test for photovoltaic equipment used to generate solar energy. The standard ( E3006 , Practice for Ultraviolet Conditioning of Photovoltaic Modules or Mini-Modules Using a Fluorescent Ultraviolet (UV) Lamp Apparatus) is used to screen out materials that degrade quickly when exposed to ultraviolet radiation from sunlight.…, ASTM Committee E44 on Solar, Geothermal and Other Alternative Energy Sources Next Meeting:, Nov. 17-18, 2015, November Committee Week, Tampa, Fla., Media Inquiries:, Nathan Osburn, tel +1.610.832.9603; nosburn@astm.org, Technical Contact:, Sean Fowler, Q-Lab Corp., Lorain, Ohio, tel +1.440.835.8700; sfowler@q-lab.com, ASTM Staff Contact:, Kristy Straiton, tel +1.610.832.9640; kstraiton@astm.org Release #9909
-
A proposed new ASTM standard will provide a lab test to determine how various types of oil will interact with water in oil spill situations. Information gleaned from such testing will ultimately lead to more effective oil spill recovery. All interested parties are welcome to join in the ongoing development of the standard ( WK41247 , Test Method for the Evaluation of the Stability of Water-in-Oil…, ASTM Committee F20 on Hazardous Substances and Oil Spill Response Next Meeting:, Oct. 27-28, 2015, October committee week, Tampa, Fla., Technical Contact:, Mervin Fingas, Edmonton, Alberta, Canada, tel +1.780.989.6059; fingasmerv@shaw.ca, ASTM Staff Contact:, Jeffrey Adkins, tel +1.610.832.9738; jadkins@astm.org, ASTM PR Contact:, Nathan Osburn, tel +1.610.832.9603; nosburn@astm.org Release #9772