Search
Advanced search
Filter by category
Filter by committee
Search results
-
ASTM International’s roofing and waterproofing committee ( D08 ) has approved a new standard that provides guidelines and limitations for below-grade foundation waterproofing systems. The new standard ( D8425 ) specifically covers applications of sodium bentonite needle-punched geotextile waterproofing systems. According to ASTM member Stacy Byrd, the standard provides general installation…, Media Inquiries:, Dan Bergels, tel +1.610.832.9602; dbergels@astm.org, Committee Contact:, Frank McConnell, tel +1.610.832.9686; fmcconnell@astm.org Release #11526 ###
-
A new standard practice developed by ASTM International’spedestrian/walkway safety and footwear committee ( F13 ) provides insight on the selection of walkway surfaces when considering pedestrian safety. This standard, soon to be available as F3132, outlines key elements for selecting new or planned walkway surfaces for reduced risk of slips and falls. “Current built environment design standards…, Media Inquiries:, Jaime Martorana, tel +1.610.832.9796; jmartorana@astm.org, Committee Contact:, Travis Murdock, tel +1.610.832.9826; tmurdock@astm.org Release #11109 ###
-
A new ASTM International standard will provide performance requirements for designers and manufacturers of eye protectors for racket sports. ASTM’s committee on sports equipment, playing surfaces, and facilities ( F08 ) developed the new standard ( F3164 ). The new standard covers both prescription and non-prescription eye protective devices for racquetball, squash, and/or tennis. Requirements…, , Media Inquiries: , Dan Bergels, tel +1.610.832.9602; dbergels@astm.org, Committee Contact: , Joe Koury, tel +1.610.832.9804; jkoury@astm.org Release #10875
-
Recently-approved revisions to three footwear standards align them with each other, helping test laboratories and users have greater confidence that product conformance reports will include the most current corresponding data for both testing and performance. One of the revised standards covers test methods for foot protection ( F2412 ). The remaining two are specifications for performance…, Media Inquiries:, Dan Bergels, tel +1.610.832.9602; dbergels@astm.org, Committee Contact:, Molly Lynyak, tel +1.610.832.9743; mlynyak@astm.org Release #10670
-
ASTM International’s committee on pedestrian/walkway safety and footwear (F13) recently held a four-day workshop to test instruments that measure the risks of people slipping while walking on various surfaces. According to organizers, this could help researchers, manufacturers, and others looking to improve walkway safety. The instruments – called walkway tribometers – assess slip resistance of…, Media Inquiries:, Dan Bergels, tel +1.610.832.9602; dbergels@astm.org, Committee Contact:, Molly Lynyak, tel +1.610.832.9743; mlynyak@astm.org Release #10595
-
A new ASTM International test method will support the growing use of roofing membranes that contain ketone ethylene ester (KEE) polymer blends that are more flexible and chemical resistant and thus less susceptible to some types of damage. In the early 2000s, members of ASTM International’s committee on roofing and waterproofing ( D08 ) developed a specification ( D6754 ) that required the…, Media Inquiries:, Dan Bergels, tel +1.610.832.9602; dbergels@astm.org, Committee Contact:, Joseph Hugo, tel +1.610.832.9740; jhugo@astm.org Release #10528
-
ASTM International is developing a proposed standard for measurement of the traction of pedestrian walkways, including in wet conditions. The proposed standard ( WK60578 ) covers the use of variable-angle tribometers, which are a particular configuration of devices that measure friction. The standard is being developed by the traction subcommittee of ASTM International’s committee on pedestrian/…, Media Inquiries:, Dan Bergels, tel +1.610.832.9602; dbergels@astm.org, Committee Contact:, Molly Lynyak, tel +1.610.832.9743; mlynyak@astm.org Release #10421
-
A new ASTM International test method aims to prevent air leakage in and around roofs, helping improve energy efficiency, reduce moisture problems, and prevent pollutants from entering the building. “It is critical that each assembly of the building envelope be investigated for air leakage performance with appropriate standards,” says ASTM member Sudhakar Molleti. "What cannot be captured in the…, ASTM Committee D08 on Roofing and Waterproofing Next Meeting:, June 11-14, 2017, June Committee Week, Toronto, Ontario, Canada, Media Inquiries:, Dan Bergels, tel +1.610.832.9602; dbergels@astm.org, Technical Contact:, Sudhakar Molleti, National Research Council Canada, Ottawa, Ontario, Canada, tel +1.613.993.9673; sudhakar.molleti@nrc.ca, ASTM Staff Contact:, Joseph Hugo, tel +1.610.832.9740; jhugo@astm.org Release #10256
-
A set of proposed ASTM International test methods will help support the growing number of roofing projects that use liquid-applied polymers. The proposed standard (WK40123, Test Methods for Sampling and Testing Liquid Applied Polymeric Roofing and Waterproofing Membranes That Are Directly Exposed to Weather) will help manufacturers, testing labs, and the construction industry as they sample,…, ASTM Committee D08 on Roofing and Waterproofing Next Meeting:, June 11-14, 2017, June Committee Week, Toronto, Ontario, Canada, Media Inquiries:, Dan Bergels, tel +1.610.832.9602; dbergels@astm.org, Technical Contact:, Philip Moser, Simpson, Gumpertz and Heger, Waltham, Mass., tel +1.781.424.3960; psmoser@sgh.com, ASTM Staff Contact:, Joseph Hugo, tel +1.610.832.9740; jhugo@astm.org Release #10247
-
A new ASTM International standard helps ensure quality of a new fire-fighting agent known as 2-BTP, which could be used in fire extinguishers on airplanes and elsewhere. The new standard ( D8060 , Specification for 2-Bromo-3,3,3-Trifluoro-1-Propene (CF3CBr=CH2) was developed by ASTM’s committee on halogenated organic solvents and fire extinguishing agents ( D26 ). The new specification provides…, ASTM Committee D26 on Halogenated Organic Solvents and Fire Extinguishing Agents Next Meeting:, June 14, 2017, June Committee Week, Toronto, Ontario, Canada, Media Inquiries:, Dan Bergels, tel +1.610.832.9602; dbergels@astm.org, Technical Contact:, Bradford Colton, American Pacific Corp., Las Vegas, Nev., tel +1.435.865.5037; bradford.colton@ampac.us, ASTM Staff Contact:, Kristy Straiton, tel +1.610.832.9640; kstraiton@astm.org Release #10235