Search
Advanced search
Filter by category
Filter by committee
Search results
-
ASTM International’s gaseous fuels committee ( D03 ) is developing a proposed standard that will help to verify the purity level of hydrogen fuel. Hydrogen fuel producers and testing laboratories will eventually be the primary users of the proposed standard ( WK89809 ). The test method will cover how gas chromatography and pulse discharge helium ionization detector (GC/PDHID) can be used to…, Media Inquiries:, Gavin O’Reilly, tel +1.610.832.9618; goreilly@astm.org, Committee Contact:, Brian Milewski, tel +1.610.832.9619; bmilewski@astm.org Release #11806 ###
-
ASTM International’s composite materials committee ( D30 ) is developed two proposed standards that will have direct practical applications for new-built infrastructure. Both proposed standards are relevant to alternative non-metallic materials that are applied to concrete structures for civil and infrastructure uses. “These proposed standards will help further implement non-metallic materials,…, Media Inquiries:, Gavin O’Reilly, tel +1.610.832.9618; goreilly@astm.org, Committee Contact:, Melissa Marcinowski, tel +1.610.832.9626; mmarcinowski@astm.org Release #11734 ###
-
ASTM International’s composite materials committee ( D30 ) has developed a new standard specification for the latest generation of fiber reinforced polymer (FRP) bars. FRP bars are used as internal concrete reinforcement. According to ASTM International member Francisco De Caso, this new standard (D8505) is a milestone after several decades of collaboration to further integrate these composites…, Media Inquiries:, Gavin O’Reilly, tel +1.610.832.9618; goreilly@astm.org, Committee Contact:, Melissa Marcinowski, tel +1.610.832.9626; mmarcinowski@astm.org Release #11664 ###
-
ASTM International’s composite materials committee ( D30 ) is developing a proposed standard that will help define the test methods and specimens that should be used for bolted joint related properties. Many composite structures are assembled with mechanically fastened (“bolted”) joints. Structural analysis of these attachments requires a linked set of design properties that are generated by…, Media Inquiries:, Dan Bergels, tel +1.610.832.9602; dbergels@astm.org, Committee Contact:, Melissa Marcinowski, tel +1.610.832.9626; mmarcinowski@astm.org Release #11569 ###
-
, A new ASTM International standard developed by the gaseous fuels committee ( D03 ) provides a test method for the measurement of siloxanes and trimethylsilanol (TMSOL) in gaseous fuels. The standard ( D8455 ) addresses siloxanes and TMSOL as they are known to build up and cause various issues with fuels and gas-powered systems. This includes gas grids and elements of generating electricity such…, Media Inquiries:, Dan Bergels, tel +1.610.832.9602; dbergels@astm.org, Committee Contact:, Brian Milewski, tel +1.610.832.9619; bmilewski@astm.org Release #11536 ###, ,
-
ASTM International’s composite materials committee ( D30 ) is developing a proposed standard that will be used in the inspections of fiber-reinforced polymer (FRP) composite repairs to buildings and other civil structures. There are a number of overlapping standards and codes on FRP inspections. The proposed standard ( WK74694 ) will include the applicable current industry references, standards,…
-
ASTM International’s gaseous fuels committee ( D03 ) is developing a proposed standard that will help determine the presence of arsine in hydrocarbon gaseous fuels including renewable natural gas (RNG). Arsine is a toxic gas that is detrimental to fuel quality and can adversely impact public health if it is released into the atmosphere. According to ASTM International member Kevin Thind, the…
-
In light of COVID-19 (coronavirus) and growing safety concerns for members and staff, ASTM International announced today that previously scheduled April standards development meetings in Boston (March 29-April 3) and Prague (April 27-30) have been canceled. The decision was based on several factors, including, but not limited to: Continued review of information and recommendations from the U.S.…, Media Inquiries:, Dan Bergels, tel +1.610.832.9602; dbergels@astm.org Release #10993
-
A new ASTM International standard will help determine how suitable a gaseous fuel is for use in internal combustion engines in both mobile and stationary applications. ASTM’s committee on gaseous fuels ( D03 ) published the new standard, which will soon be published as D8221. The new standard will be used to determine the calculated methane number (MNc) of gaseous fuels to be used in internal…, Media Inquiries:, Dan Bergels, tel +1.610.832.9602; dbergels@astm.org, Committee Contact:, Brian Milewski, tel +1.610.832.9619; bmilewski@astm.org Release #10649
-
Two of the world’s leading safety-standards developers are joining forces to help the growing number of public safety professionals who want to use drones – also known as unmanned aircraft systems (UAS) – to help protect and save lives. Today, the National Fire Protection Association and ASTM International signed a Memorandum of Understanding to support a joint working group (JWG) of about two…, Standard for Small Unmanned Aircraft Systems (sUAS) Used for Public Safety Operations, ). According to Morgan and Pauley, the group would serve as a key resource for various global efforts related to drone standardization., About ASTM International, Committed to serving global societal needs, ASTM International positively impacts public health and safety, consumer confidence, and overall quality of life. We integrate consensus standards – developed with our international membership of volunteer technical experts – and innovative services to improve lives… Helping our world work better. www.astm.org , About NFPA, Founded in 1896, NFPA is a global, nonprofit organization devoted to eliminating death, injury, property and economic loss due to fire, electrical and related hazards. The association delivers information and knowledge through more than 300 consensus codes and standards, research, training, education, outreach and advocacy; and by partnering with others who share an interest in furthering the…, Media Inquiries:, Nate Osburn, tel +1.610.832.9603; nosburn@astm.org and Lorraine Carli, tel +1.617.984.7275; publicaffairs@nfpa.org , MOU / Joint Working Group Contacts:, Christine DeJong, tel +1.610.832.9736; cdejong@astm.org and Curt Floyd, cfloyd@nfpa.org Release #10527