Search
Advanced search
Filter by category
Filter by committee
Search results
-
ASTM International’s gaseous fuels committee ( D03 ) is developing a proposed standard that will help to verify the purity level of hydrogen fuel. Hydrogen fuel producers and testing laboratories will eventually be the primary users of the proposed standard ( WK89809 ). The test method will cover how gas chromatography and pulse discharge helium ionization detector (GC/PDHID) can be used to…, Media Inquiries:, Gavin O’Reilly, tel +1.610.832.9618; goreilly@astm.org, Committee Contact:, Brian Milewski, tel +1.610.832.9619; bmilewski@astm.org Release #11806 ###
-
, A new ASTM International standard developed by the gaseous fuels committee ( D03 ) provides a test method for the measurement of siloxanes and trimethylsilanol (TMSOL) in gaseous fuels. The standard ( D8455 ) addresses siloxanes and TMSOL as they are known to build up and cause various issues with fuels and gas-powered systems. This includes gas grids and elements of generating electricity such…, Media Inquiries:, Dan Bergels, tel +1.610.832.9602; dbergels@astm.org, Committee Contact:, Brian Milewski, tel +1.610.832.9619; bmilewski@astm.org Release #11536 ###, ,
-
ASTM International’s roofing and waterproofing committee ( D08 ) has approved a new standard that provides guidelines and limitations for below-grade foundation waterproofing systems. The new standard ( D8425 ) specifically covers applications of sodium bentonite needle-punched geotextile waterproofing systems. According to ASTM member Stacy Byrd, the standard provides general installation…, Media Inquiries:, Dan Bergels, tel +1.610.832.9602; dbergels@astm.org, Committee Contact:, Frank McConnell, tel +1.610.832.9686; fmcconnell@astm.org Release #11526 ###
-
ASTM International’s gaseous fuels committee ( D03 ) is developing a proposed standard that will help determine the presence of arsine in hydrocarbon gaseous fuels including renewable natural gas (RNG). Arsine is a toxic gas that is detrimental to fuel quality and can adversely impact public health if it is released into the atmosphere. According to ASTM International member Kevin Thind, the…
-
A new ASTM International standard will provide performance requirements for designers and manufacturers of eye protectors for racket sports. ASTM’s committee on sports equipment, playing surfaces, and facilities ( F08 ) developed the new standard ( F3164 ). The new standard covers both prescription and non-prescription eye protective devices for racquetball, squash, and/or tennis. Requirements…, , Media Inquiries: , Dan Bergels, tel +1.610.832.9602; dbergels@astm.org, Committee Contact: , Joe Koury, tel +1.610.832.9804; jkoury@astm.org Release #10875
-
A new ASTM International standard will help determine how suitable a gaseous fuel is for use in internal combustion engines in both mobile and stationary applications. ASTM’s committee on gaseous fuels ( D03 ) published the new standard, which will soon be published as D8221. The new standard will be used to determine the calculated methane number (MNc) of gaseous fuels to be used in internal…, Media Inquiries:, Dan Bergels, tel +1.610.832.9602; dbergels@astm.org, Committee Contact:, Brian Milewski, tel +1.610.832.9619; bmilewski@astm.org Release #10649
-
A new ASTM International test method will support the growing use of roofing membranes that contain ketone ethylene ester (KEE) polymer blends that are more flexible and chemical resistant and thus less susceptible to some types of damage. In the early 2000s, members of ASTM International’s committee on roofing and waterproofing ( D08 ) developed a specification ( D6754 ) that required the…, Media Inquiries:, Dan Bergels, tel +1.610.832.9602; dbergels@astm.org, Committee Contact:, Joseph Hugo, tel +1.610.832.9740; jhugo@astm.org Release #10528
-
A new ASTM International test method aims to prevent air leakage in and around roofs, helping improve energy efficiency, reduce moisture problems, and prevent pollutants from entering the building. “It is critical that each assembly of the building envelope be investigated for air leakage performance with appropriate standards,” says ASTM member Sudhakar Molleti. "What cannot be captured in the…, ASTM Committee D08 on Roofing and Waterproofing Next Meeting:, June 11-14, 2017, June Committee Week, Toronto, Ontario, Canada, Media Inquiries:, Dan Bergels, tel +1.610.832.9602; dbergels@astm.org, Technical Contact:, Sudhakar Molleti, National Research Council Canada, Ottawa, Ontario, Canada, tel +1.613.993.9673; sudhakar.molleti@nrc.ca, ASTM Staff Contact:, Joseph Hugo, tel +1.610.832.9740; jhugo@astm.org Release #10256
-
A set of proposed ASTM International test methods will help support the growing number of roofing projects that use liquid-applied polymers. The proposed standard (WK40123, Test Methods for Sampling and Testing Liquid Applied Polymeric Roofing and Waterproofing Membranes That Are Directly Exposed to Weather) will help manufacturers, testing labs, and the construction industry as they sample,…, ASTM Committee D08 on Roofing and Waterproofing Next Meeting:, June 11-14, 2017, June Committee Week, Toronto, Ontario, Canada, Media Inquiries:, Dan Bergels, tel +1.610.832.9602; dbergels@astm.org, Technical Contact:, Philip Moser, Simpson, Gumpertz and Heger, Waltham, Mass., tel +1.781.424.3960; psmoser@sgh.com, ASTM Staff Contact:, Joseph Hugo, tel +1.610.832.9740; jhugo@astm.org Release #10247
-
A new ASTM International standard will help reduce the amount of used roofing materials that goes to landfills. ASTM’s committee on roofing and waterproofing ( D08 ) developed the new standard, which will soon be available as D8013, Guide for Establishing a Recycle Program for Roof Covers. According to ASTM member Joseph Schwetz of Sika Sarnafil Inc., the new guide will help building owners who…, ASTM Committee D08 on Roofing and Waterproofing Next Meeting:, Dec. 4-7, 2016, December Committee Week, Orlando, Fla., Media Inquiries:, Dan Bergels, tel +1.610.832.9602; dbergels@astm.org, Technical Contact:, Joseph Schwetz, Sika Sarnafil Inc., Canton, Mass., tel +1.781.828.5400; schwetz.joe@us.sika.com, ASTM Staff Contact:, Joseph Hugo, tel +1.610.832.9740; jhugo@astm.org Release #10217