Search
Advanced search
Filter by category
Filter by committee
Search results
-
ASTM International’s nuclear fuel cycle committee ( C26 ) has developed a standard describing a new technique for measuring the forward rate of glass corrosion. The new standard (soon to be published as C1926) details the stirred-reactor coupon analysis (SRCA) method, in which monolithic glass coupons are partially masked with an inert material before undergoing corrosion in a large volume of…, Media Inquiries:, Gavin O’Reilly, tel +1.610.832.9618; goreilly@astm.org, Committee Contact:, Steve Mawn, tel +1.610.832.9726; smawn@astm.org Release #11649 ###
-
A new ASTM International standard will allow laboratories and research institutions to estimate mechanical properties of metallic materials through a minimally destructive process known as small punch testing. ASTM’s nuclear technology and applications committee ( E10 ) developed the new standard, which will soon be published as E3205. “Small punch testing uses extremely small specimens to…, Media Inquiries:, Dan Bergels, tel +1.610.832.9602; dbergels@astm.org, Committee Contact:, Stephen Mawn, tel +1.610.8329726; smawn@astm.org Release #11055 ###
-
A new ASTM International standard will be used to test the efficiency of radiological decontamination methods. ASTM’s committee on nuclear technology and applications ( E10 ) developed the new standard ( E3190 ). ASTM International member Rick Demmer notes that the new standard will provide a difficult final exam for new decontamination efforts so they can be evaluated in an independent method…
-
A new ASTM International standard aims to help protect workers and property during routine operations at nuclear facilities. ASTM International’s committee on nuclear technology and applications ( E10 ) developed the standard ( E3191 ), which provides guidance on permanent foam coatings – applied to various facility surfaces – that reduce: Migration of contamination into or along buildings,…, Media Inquiries:, Dan Bergels, tel +1.610.832.9602; dbergels@astm.org, Committee Contact:, Stephen Mawn, tel +1.610.832.9726; smawn@astm.org Release #10707
-
A new test method developed by ASTM International’s nuclear fuel cycle committee ( C26 ) will help better characterize uranium materials within the nuclear fuel cycle. Specifically, the standard ( C1871 ) outlines the “double spike” test method for isotopic analysis of uranium samples by thermal ionization mass spectrometry. “Due to improved precision, the double spike method has been used in…, Media Inquiries:, Dan Bergels, tel +1.610.832.9602; dbergels@astm.org, Committee Contact:, Stephen Mawn, tel +1.610.832.9726; smawn@astm.org Release #10495
-
A new ASTM International standard serves as a guide to help experts examine nuclear-fuel pellets, cylindrical ceramic parts that are inserted into fuel rods for use in nuclear reactors. According to ASTM International member Gregoire Toury, an AREVA advisory engineer in MOX, ceramographic examination of these pellets is crucial for verifying product quality relative to thermo-mechanical behavior…, Media Inquiries:, Dan Bergels, tel +1.610.832.9602; dbergels@astm.org, Committee Contact:, Stephen Mawn, tel +1.610.832.9726; smawn@astm.org Release #10468
-
ASTM International’s committee on nuclear technology and applications ( E10 ) has created new specifications for coatings that help prevent the release of radioactive particles when nuclear facilities are being decommissioned. The specifications aim to immobilize radioactive contamination, minimize worker exposure, and protect uncontaminated areas against the spread of radioactive contamination…, Media Inquiries:, Dan Bergels, tel +1.610.832.9602; dbergels@astm.org, Committee Contact:, Stephen Mawn, tel +1.610.832.9726; smawn@astm.org R elease #10372
-
A new ASTM International test method will help improve the measurements of uranium isotope ratios, helping laboratories analyze nuclear material and supporting efforts of organizations like the International Atomic Energy Agency (IAEA). The new standard is C1832 , Test Method for Determination of Uranium Isotopic Composition by the Modified Total Evaporation (MTE) Method Using a Thermal…, ASTM Committee C26 on Nuclear Fuel Cycle Next Meeting:, June 12-17, 2016, Vienna, Austria, Media Inquiries:, Nathan Osburn, tel +1.610.832.9603; nosburn@astm.org, Technical Contact:, Stephan Richter, Institute for Reference Materials and Measurements; tel +32.14.571.701; stephan.richter@ec.europa.eu, ASTM Staff Contact:, Joe Koury, tel +1.610.832.9804; jkoury@astm.org Release #10002
-
ASTM Fence Committee Approves New Standards on Ornamental Aluminum Fencing and Polymer Privacy SlatsASTM International Committee F14 on Fences has recently approved two new standards: ASTM F2957 , Specification for Ornamental Aluminum Fence Systems; and ASTM F3000/F3000M , Specification for Polymer Privacy Insert Slats for Chain Link Fabric and Privacy Chain Link Fabric Manufactured Containing Pre-Installed Privacy Slats., Ornamental Aluminum Fence Systems, ASTM F2957 was developed by Subcommittee F14.35 on Architectural Metal Fence Systems. The new standard defines minimum selection criteria and test procedures to ensure product users that an ornamental aluminum fence system has sufficient strength to withstand reasonable loads and forces, and has the appropriate combination of material and organic coating surface protection to withstand effects of…, Polymer Privacy Insert Slats, ASTM F3000/F3000M is under the jurisdiction of Subcommittee F14.40 on Chain Link Fence and Wire Accessories . ASTM F3000/F3000M covers both inserted slats that are placed into chain link fabric after the fence has been installed as well as slats that are pre-inserted into chain link mesh during the link weaving process. According to William Ullrich, principal, Link Consulting LLC, and an F14…, ASTM Committee F14 Next Meeting:, June 25, 2013, ASTM International Headquarters, West Conshohocken, Pa., Technical Contact:, (ASTM F2957) Larry Burkholder, Digger Specialties Inc., Bremen, Ind., Phone: 574-546-5999; lburkholder@diggerspecialties.com; (ASTM F3000/F3000M) William Ullrich, Link Consulting LLC, Annapolis, Md., Phone: 410-849-2610; bullrich.link@comcast.net , ASTM Staff Contact:, Thomas O’Toole, Phone: 610-832-9739; totoole@astm.org , ASTM PR Contact:, Barbara Schindler, Phone: 610-832-9603; bschindl@astm.org Release #9375
-
ASTM International recently developed its, Roadmap in Support of Commercial Nuclear Power, to provide a practical set of plans for updating ASTM nuclear energy standards in conjunction with the Nuclear Energy Standards Coordination Collaborative (NESCC). The ultimate goal of the roadmap, a document that spells out these plans in detail, is to ensure a safe and economical source of electricity for now and in the future. A link to the Roadmap can be found in the ASTM Nuclear Portal at…, Technical Contact:, Stephen Byrne, Phone: 860-342-7363; pnsbyrne@yahoo.com, ASTM Staff Contact:, Joe Koury, Phone: 610-832-9804; jkoury@astm.org, ASTM PR Contact:, Barbara Schindler, Phone: 610-832-9603; bschindl@astm.org R elease #9321