Search
Advanced search
Filter by category
Filter by committee
Search results
-
ASTM International’s nuclear fuel cycle committee ( C26 ) has developed a standard describing a new technique for measuring the forward rate of glass corrosion. The new standard (soon to be published as C1926) details the stirred-reactor coupon analysis (SRCA) method, in which monolithic glass coupons are partially masked with an inert material before undergoing corrosion in a large volume of…, Media Inquiries:, Gavin O’Reilly, tel +1.610.832.9618; goreilly@astm.org, Committee Contact:, Steve Mawn, tel +1.610.832.9726; smawn@astm.org Release #11649 ###
-
A new standard practice developed by ASTM International’spedestrian/walkway safety and footwear committee ( F13 ) provides insight on the selection of walkway surfaces when considering pedestrian safety. This standard, soon to be available as F3132, outlines key elements for selecting new or planned walkway surfaces for reduced risk of slips and falls. “Current built environment design standards…, Media Inquiries:, Jaime Martorana, tel +1.610.832.9796; jmartorana@astm.org, Committee Contact:, Travis Murdock, tel +1.610.832.9826; tmurdock@astm.org Release #11109 ###
-
Recently-approved revisions to three footwear standards align them with each other, helping test laboratories and users have greater confidence that product conformance reports will include the most current corresponding data for both testing and performance. One of the revised standards covers test methods for foot protection ( F2412 ). The remaining two are specifications for performance…, Media Inquiries:, Dan Bergels, tel +1.610.832.9602; dbergels@astm.org, Committee Contact:, Molly Lynyak, tel +1.610.832.9743; mlynyak@astm.org Release #10670
-
ASTM International’s committee on pedestrian/walkway safety and footwear (F13) recently held a four-day workshop to test instruments that measure the risks of people slipping while walking on various surfaces. According to organizers, this could help researchers, manufacturers, and others looking to improve walkway safety. The instruments – called walkway tribometers – assess slip resistance of…, Media Inquiries:, Dan Bergels, tel +1.610.832.9602; dbergels@astm.org, Committee Contact:, Molly Lynyak, tel +1.610.832.9743; mlynyak@astm.org Release #10595
-
A new test method developed by ASTM International’s nuclear fuel cycle committee ( C26 ) will help better characterize uranium materials within the nuclear fuel cycle. Specifically, the standard ( C1871 ) outlines the “double spike” test method for isotopic analysis of uranium samples by thermal ionization mass spectrometry. “Due to improved precision, the double spike method has been used in…, Media Inquiries:, Dan Bergels, tel +1.610.832.9602; dbergels@astm.org, Committee Contact:, Stephen Mawn, tel +1.610.832.9726; smawn@astm.org Release #10495
-
A new ASTM International standard serves as a guide to help experts examine nuclear-fuel pellets, cylindrical ceramic parts that are inserted into fuel rods for use in nuclear reactors. According to ASTM International member Gregoire Toury, an AREVA advisory engineer in MOX, ceramographic examination of these pellets is crucial for verifying product quality relative to thermo-mechanical behavior…, Media Inquiries:, Dan Bergels, tel +1.610.832.9602; dbergels@astm.org, Committee Contact:, Stephen Mawn, tel +1.610.832.9726; smawn@astm.org Release #10468
-
ASTM International is developing a proposed standard for measurement of the traction of pedestrian walkways, including in wet conditions. The proposed standard ( WK60578 ) covers the use of variable-angle tribometers, which are a particular configuration of devices that measure friction. The standard is being developed by the traction subcommittee of ASTM International’s committee on pedestrian/…, Media Inquiries:, Dan Bergels, tel +1.610.832.9602; dbergels@astm.org, Committee Contact:, Molly Lynyak, tel +1.610.832.9743; mlynyak@astm.org Release #10421
-
A new ASTM International guide responds to a decades-long need to enhance safety surrounding protective coating systems at nuclear power plants. The new standard (soon to be published as D8104, Guide for Determining Coating Qualification Test Data Applicability) was developed by ASTM International’s committee on protective coating and lining work for power generation facilities ( D33 ). According…, Media Inquiries:, Dan Bergels, tel +1.610.832.9602; dbergels@astm.org, Technical Contact:, Jon R. Cavallo, PE, tel +1.603.767.8650; jrcpe@aol.com, ASTM Staff Contact:, Joseph Hugo, tel +1.610.832.9740; jhugo@astm.org R elease #10288
-
ASTM is launching a new subcommittee that will develop test methods and specifications for coatings and linings used in hydroelectric power plants. The new group is part of the Committee on Protective Coatings and Lining Work for Power Generation Facilities ( D33 ). Subcommittee D33.13 on Protective Coatings and Linings for Hydroelectric Power Generation Facilities will address abrasion,…, ASTM Committee D33 on Protective Coatings and Lining Work for Power Generation Facilities Next Meeting:, July 20–21, 2016, West Conshohocken, Pa., Media Inquiries:, Dan Bergels, tel +1.610.832.9602; dbergels@astm.org, Technical Contact:, Allen Skaja, U.S. Bureau of Reclamation, Lakewood, Colo., tel +1.303.445.2396; askaja@usbr.gov, ASTM Staff Contact:, Joe Hugo, tel +1.610.832.9740; jhugo@astm.org Release #10113
-
A new ASTM International test method will help improve the measurements of uranium isotope ratios, helping laboratories analyze nuclear material and supporting efforts of organizations like the International Atomic Energy Agency (IAEA). The new standard is C1832 , Test Method for Determination of Uranium Isotopic Composition by the Modified Total Evaporation (MTE) Method Using a Thermal…, ASTM Committee C26 on Nuclear Fuel Cycle Next Meeting:, June 12-17, 2016, Vienna, Austria, Media Inquiries:, Nathan Osburn, tel +1.610.832.9603; nosburn@astm.org, Technical Contact:, Stephan Richter, Institute for Reference Materials and Measurements; tel +32.14.571.701; stephan.richter@ec.europa.eu, ASTM Staff Contact:, Joe Koury, tel +1.610.832.9804; jkoury@astm.org Release #10002