Search
Advanced search
Filter by category
Filter by committee
Search results
-
ASTM International’s nuclear fuel cycle committee ( C26 ) has developed a standard describing a new technique for measuring the forward rate of glass corrosion. The new standard (soon to be published as C1926) details the stirred-reactor coupon analysis (SRCA) method, in which monolithic glass coupons are partially masked with an inert material before undergoing corrosion in a large volume of…, Media Inquiries:, Gavin O’Reilly, tel +1.610.832.9618; goreilly@astm.org, Committee Contact:, Steve Mawn, tel +1.610.832.9726; smawn@astm.org Release #11649 ###
-
A new ASTM International standard will provide a specification for low density poly vinylidene fluoride (PVDF) based materials intended for use in wire and cable jacketing. ASTM’s committee on electrical and electronic insulating materials (D09) developed the standard, which will be soon published as D8318. Low density PVDF cable jacketing is a new product that has the potential to offer…, Media Inquiries:, Dan Bergels, tel +1.610.832.9602; dbergels@astm.org, Committee Contact:, Alyson Fick, tel +610.832.9710; afick@astm.org Release #11058 ###
-
In light of COVID-19 (coronavirus) and ongoing safety concerns for members and staff, ASTM International announced today that all previously scheduled in-person May standards development meetings (including independent meetings) have been canceled. Earlier this month, ASTM International announced the cancellation of all April in-person meetings . These decisions were based on several factors,…, Media Inquiries:, Dan Bergels, tel +1.610.832.9602; dbergels@astm.org Release #11001 ###
-
In light of COVID-19 (coronavirus) and growing safety concerns for members and staff, ASTM International announced today that previously scheduled April standards development meetings in Boston (March 29-April 3) and Prague (April 27-30) have been canceled. The decision was based on several factors, including, but not limited to: Continued review of information and recommendations from the U.S.…, Media Inquiries:, Dan Bergels, tel +1.610.832.9602; dbergels@astm.org Release #10993
-
A new test method developed by ASTM International’s nuclear fuel cycle committee ( C26 ) will help better characterize uranium materials within the nuclear fuel cycle. Specifically, the standard ( C1871 ) outlines the “double spike” test method for isotopic analysis of uranium samples by thermal ionization mass spectrometry. “Due to improved precision, the double spike method has been used in…, Media Inquiries:, Dan Bergels, tel +1.610.832.9602; dbergels@astm.org, Committee Contact:, Stephen Mawn, tel +1.610.832.9726; smawn@astm.org Release #10495
-
A new ASTM International standard serves as a guide to help experts examine nuclear-fuel pellets, cylindrical ceramic parts that are inserted into fuel rods for use in nuclear reactors. According to ASTM International member Gregoire Toury, an AREVA advisory engineer in MOX, ceramographic examination of these pellets is crucial for verifying product quality relative to thermo-mechanical behavior…, Media Inquiries:, Dan Bergels, tel +1.610.832.9602; dbergels@astm.org, Committee Contact:, Stephen Mawn, tel +1.610.832.9726; smawn@astm.org Release #10468
-
Peter Pavlick, director at PBM Solutions in Solon, Ohio, has been awarded the John N. Balough Distinguished Service Award by ASTM International Committee F11 on Vacuum Cleaners . The committee honored Pavlick, a charter member of the committee, for his distinguished service, high moral integrity, and valuable leadership within F11. He also received the Award of Appreciation from the committee in…, Media Inquiries:, Dan Bergels, tel +1.610.832.9602; dbergels@astm.org Release #10093
-
A new ASTM International test method will help improve the measurements of uranium isotope ratios, helping laboratories analyze nuclear material and supporting efforts of organizations like the International Atomic Energy Agency (IAEA). The new standard is C1832 , Test Method for Determination of Uranium Isotopic Composition by the Modified Total Evaporation (MTE) Method Using a Thermal…, ASTM Committee C26 on Nuclear Fuel Cycle Next Meeting:, June 12-17, 2016, Vienna, Austria, Media Inquiries:, Nathan Osburn, tel +1.610.832.9603; nosburn@astm.org, Technical Contact:, Stephan Richter, Institute for Reference Materials and Measurements; tel +32.14.571.701; stephan.richter@ec.europa.eu, ASTM Staff Contact:, Joe Koury, tel +1.610.832.9804; jkoury@astm.org Release #10002
-
ASTM International’s Committee D09 (Electrical and Electronic Insulating Materials) invites anyone to join in developing a new standard to help maintain the integrity of cables during an emergency such as a fire. Specifically, the proposed standard (WK52230, Test Method for Determination of Acid Gas Content of Wire and Cable Insulation or Jacket Material) will help determine the halogen content…, ASTM Committee D09 Next Meeting:, April 14-15, 2016, April Committee Week, San Antonio, Texas, Media Inquiries:, Nathan Osburn, tel +1.610.832.9603; nosburn@astm.org, Technical Contact:, Larry Ingram, Williamsport, Pa., tel +1.570.916.8448; larry77151@comcast.net , ASTM Staff Contact:, Katerina Koperna, tel +1.610.832.9728; kkoperna@astm.org Release #9960
-
The laboratory conditions test described in a new ASTM International standard will be used by manufacturers to determine the sustained air performance and exhaust emissions of a central vacuum cleaner. ASTM F2826 , Test Method for Evaluating the Sustained Air Performance and Exhaust Emissions of Central Vacuum Cleaning Units, was developed by Subcommittee F11.22 on Air Performance , part of ASTM…, ASTM Committee F11 Next Meeting:, May 5-7, 2014, May Committee Week, Toronto, Ontario, Canada, Technical Contact:, Darrell Nieschwitz, H-P Products Inc., Louisville, Ohio, Phone: 330-875-5556, ext. 2272; dnieschwitz@h-pproducts.com, ASTM Staff Contact:, Diane Trinsey, Phone: 610-832-9661; dtrinsey@astm.org , ASTM PR Contact:, Barbara Schindler, Phone: 610-832-9603; bschindl@astm.org Release #9584