Search
Advanced search
Filter by category
Filter by committee
Search results
-
ASTM International’s nuclear fuel cycle committee ( C26 ) has developed a standard describing a new technique for measuring the forward rate of glass corrosion. The new standard (soon to be published as C1926) details the stirred-reactor coupon analysis (SRCA) method, in which monolithic glass coupons are partially masked with an inert material before undergoing corrosion in a large volume of…, Media Inquiries:, Gavin O’Reilly, tel +1.610.832.9618; goreilly@astm.org, Committee Contact:, Steve Mawn, tel +1.610.832.9726; smawn@astm.org Release #11649 ###
-
ASTM International’s roofing and waterproofing committee ( D08 ) has approved a new standard that provides guidelines and limitations for below-grade foundation waterproofing systems. The new standard ( D8425 ) specifically covers applications of sodium bentonite needle-punched geotextile waterproofing systems. According to ASTM member Stacy Byrd, the standard provides general installation…, Media Inquiries:, Dan Bergels, tel +1.610.832.9602; dbergels@astm.org, Committee Contact:, Frank McConnell, tel +1.610.832.9686; fmcconnell@astm.org Release #11526 ###
-
A new ASTM International standard will help determine impurities in monoethylene glycol (MEG). ASTM’s committee on aromatic, industrial, specialty, and related chemicals ( D16 ) developed the standard, which will soon be published as D8311. MEG is used predominantly as a raw material in the production of polyester fibers, but it is also commonly used as a heat transfer fluid and a component in…, Media Inquiries:, Dan Bergels, tel +1.610.832.9602; dbergels@astm.org, Committee Contact:, Melissa Marcinowski, tel +1.610.832.9626; mmarcinowski@astm.org Release #11024 ###
-
A new ASTM International standard will provide performance requirements for designers and manufacturers of eye protectors for racket sports. ASTM’s committee on sports equipment, playing surfaces, and facilities ( F08 ) developed the new standard ( F3164 ). The new standard covers both prescription and non-prescription eye protective devices for racquetball, squash, and/or tennis. Requirements…, , Media Inquiries: , Dan Bergels, tel +1.610.832.9602; dbergels@astm.org, Committee Contact: , Joe Koury, tel +1.610.832.9804; jkoury@astm.org Release #10875
-
A new test method (D8266) will help analyze impurities of a certain compound (bisphenol A) used in polycarbonate and epoxy resin, helping support the manufacturing and trade of many plastic products. Impurities in bisphenol A can slow down polymerization and result in impurities of the final product, according to Huang Yu, a junior engineer at Sinopec. She says that the test helps determine trace…
-
A new ASTM International test method will support the growing use of roofing membranes that contain ketone ethylene ester (KEE) polymer blends that are more flexible and chemical resistant and thus less susceptible to some types of damage. In the early 2000s, members of ASTM International’s committee on roofing and waterproofing ( D08 ) developed a specification ( D6754 ) that required the…, Media Inquiries:, Dan Bergels, tel +1.610.832.9602; dbergels@astm.org, Committee Contact:, Joseph Hugo, tel +1.610.832.9740; jhugo@astm.org Release #10528
-
A new ASTM International standard will provide better quality control for products made with polyester. The new standard (soon to be published as D8063) was developed by ASTM International’s committee on aromatic, industrial, specialty, and related chemicals ( D16 ). According to ASTM International member Yuhong Zhang, the presence of water in purified terephthalic acid (PTA) – used to make…, Media Inquiries:, Dan Bergels, tel +1.610.832.9602; dbergels@astm.org, Committee Contact:, Kristy Straiton, tel +1.610.832.9640; kstraiton@astm.org Release #10517
-
A new test method developed by ASTM International’s nuclear fuel cycle committee ( C26 ) will help better characterize uranium materials within the nuclear fuel cycle. Specifically, the standard ( C1871 ) outlines the “double spike” test method for isotopic analysis of uranium samples by thermal ionization mass spectrometry. “Due to improved precision, the double spike method has been used in…, Media Inquiries:, Dan Bergels, tel +1.610.832.9602; dbergels@astm.org, Committee Contact:, Stephen Mawn, tel +1.610.832.9726; smawn@astm.org Release #10495
-
A new ASTM International standard serves as a guide to help experts examine nuclear-fuel pellets, cylindrical ceramic parts that are inserted into fuel rods for use in nuclear reactors. According to ASTM International member Gregoire Toury, an AREVA advisory engineer in MOX, ceramographic examination of these pellets is crucial for verifying product quality relative to thermo-mechanical behavior…, Media Inquiries:, Dan Bergels, tel +1.610.832.9602; dbergels@astm.org, Committee Contact:, Stephen Mawn, tel +1.610.832.9726; smawn@astm.org Release #10468
-
A new ASTM International test method aims to prevent air leakage in and around roofs, helping improve energy efficiency, reduce moisture problems, and prevent pollutants from entering the building. “It is critical that each assembly of the building envelope be investigated for air leakage performance with appropriate standards,” says ASTM member Sudhakar Molleti. "What cannot be captured in the…, ASTM Committee D08 on Roofing and Waterproofing Next Meeting:, June 11-14, 2017, June Committee Week, Toronto, Ontario, Canada, Media Inquiries:, Dan Bergels, tel +1.610.832.9602; dbergels@astm.org, Technical Contact:, Sudhakar Molleti, National Research Council Canada, Ottawa, Ontario, Canada, tel +1.613.993.9673; sudhakar.molleti@nrc.ca, ASTM Staff Contact:, Joseph Hugo, tel +1.610.832.9740; jhugo@astm.org Release #10256