Search
Advanced search
Filter by category
Filter by committee
Search results
-
A new ASTM International standard will allow laboratories and research institutions to estimate mechanical properties of metallic materials through a minimally destructive process known as small punch testing. ASTM’s nuclear technology and applications committee ( E10 ) developed the new standard, which will soon be published as E3205. “Small punch testing uses extremely small specimens to…, Media Inquiries:, Dan Bergels, tel +1.610.832.9602; dbergels@astm.org, Committee Contact:, Stephen Mawn, tel +1.610.8329726; smawn@astm.org Release #11055 ###
-
A new ASTM International standard will be used to test for specific metals in crude oils. ASTM’s petroleum products, liquid fuels, and lubricants committee ( D02 ) developed the new standard. The new standard (soon to be published as D8322) describes a test method using microwave plasma atomic emission spectrometry (MP-AES) to determine the presence of nickel, vanadium, iron, and other elements…, Media Inquiries:, Dan Bergels, tel +1.610.832.9602; dbergels@astm.org, Committee Contact:, Alyson Fick, tel +1.610.832.9710; afick@astm.org Release #11053 ###
-
In light of COVID-19 (coronavirus) and growing safety concerns for members and staff, ASTM International announced today that previously scheduled April standards development meetings in Boston (March 29-April 3) and Prague (April 27-30) have been canceled. The decision was based on several factors, including, but not limited to: Continued review of information and recommendations from the U.S.…, Media Inquiries:, Dan Bergels, tel +1.610.832.9602; dbergels@astm.org Release #10993
-
A new ASTM International standard will be used to test the efficiency of radiological decontamination methods. ASTM’s committee on nuclear technology and applications ( E10 ) developed the new standard ( E3190 ). ASTM International member Rick Demmer notes that the new standard will provide a difficult final exam for new decontamination efforts so they can be evaluated in an independent method…
-
A new ASTM International standard aims to help protect workers and property during routine operations at nuclear facilities. ASTM International’s committee on nuclear technology and applications ( E10 ) developed the standard ( E3191 ), which provides guidance on permanent foam coatings – applied to various facility surfaces – that reduce: Migration of contamination into or along buildings,…, Media Inquiries:, Dan Bergels, tel +1.610.832.9602; dbergels@astm.org, Committee Contact:, Stephen Mawn, tel +1.610.832.9726; smawn@astm.org Release #10707
-
ASTM International’s committee on nuclear technology and applications ( E10 ) has created new specifications for coatings that help prevent the release of radioactive particles when nuclear facilities are being decommissioned. The specifications aim to immobilize radioactive contamination, minimize worker exposure, and protect uncontaminated areas against the spread of radioactive contamination…, Media Inquiries:, Dan Bergels, tel +1.610.832.9602; dbergels@astm.org, Committee Contact:, Stephen Mawn, tel +1.610.832.9726; smawn@astm.org R elease #10372
-
Activated carbon is processed to have small, low-volume pores that increase the surface area available for adsorption. It has applications in the medical, environmental and energy realms, among others. Since 1962, ASTM International Committee D28 on Activated Carbon has developed standards that play a pre-eminent role in how activated carbon is used. A D28 subcommittee, D28.02 on Liquid Phase…, WK47401, Xylenol Orange Dye, The xylenol orange dye test is a way to determine the relative adsorption rate of unused or reactivated carbons by adsorption of xylenol orange from aqueous solution. This is an important means for deciding which type of activated carbon to use to a specific water treatment application. “Activated carbon performance can roughly be defined as a combination of the ability to adsorb a particular…, WK47421, Particle Size Distribution, Mercury flue gas, home water filters and potable water treatment are the main applications in which powdered and fine mesh carbons are used. A proposed new test method will describe how a laser light scattering technique can determine the particle size distribution of fine mesh activated carbon. ASTM member Neal Megonnell, vice president, sales and marketing, Haycarb USA, says the proposed test…, ASTM Committee D28 Next Meeting:, April 27, April Committee Week, Anaheim, Calif., Technical Contact:, (WK47401) Adam Redding, Ph.D., Evoqua Water Technologies LLC, Northwest, Pa., tel +1.724.719.0805; adam.redding@evoqua.com and (WK47421) Neal E. Megonnell, Haycarb USA, Pittsburgh, Pa., tel +1.412.709.7487; neal@haycarbusa.com, ASTM Staff Contact:, Kelly Paul, tel +1.610.832.9745; kpaul@astm.org, ASTM PR Contact:, Barbara Schindler, tel +1.610.832.9603; bschindl@astm.org Release #9731
-
A proposed new ASTM International standard will provide an up-to-date method for the aluminum industry to analyze samples by inductively coupled plasma-atomic emission spectroscopy. The proposed new standard, WK35993 , Test Method for Analysis of Aluminum and Aluminum Alloys by Inductively Coupled Plasma Atomic Emission Spectrometry (Performance Based Method), is being developed by Subcommittee…
-
ASTM Committee E10 on Nuclear Technology and Applications has approved two new ASTM standards, ASTM E2628 , Practice for Dosimetry for Radiation Processing, and ASTM E2701 , Guide for Performance Characterization of Dosimeters and Dosimetry Systems for Use in Radiation Processing. Both standards are under the jurisdiction of Subcommittee E10.01 on Radiation Processing: Dosimetry and Applications…, ASTM Committee E10 Next Meeting:, Jan. 24-27, January committee week, San Antonio, Texas, Technical Contact:, (E2628) John Logar, Ethicon Inc., Somerville, N.J., Phone: 908-218-5638; jlogar8@its.jnj.com ; (E2701) Rod Chu, Ottawa, Ontario, Canada, Phone: 613-565-2305; rodchu@rogers.com, ASTM Staff Contact:, Joe Koury, Phone: 610-832-9804; jkoury@astm.org, ASTM PR Contact:, Barbara Schindler, Phone: 610-832-9603; bschindl@astm.org Release #84 58/Jan2010
-
Mercury emissions from flue gases in coal-fired power plants are a large source of atmospheric mercury in the United States, but no standard for determination of mercury adsorption currently exists. One promising method of controlling these emissions involves the injection of powdered activated carbon into the flue gas. A proposed new ASTM International standard would evaluate the performance of…