Search
Advanced search
Filter by category
Filter by committee
Search results
-
ASTM International’s committee on textiles ( D13 ) is developing a proposed standard for writing terminology in textile standards. “This practice is intended to address the importance of a ‘critical building block’ that is used to develop and construct a standard that has value and utility for many years,” says ASTM International member Vince Diaz. “If the terminology is vague or ambiguous, the…, Media Inquiries:, Gavin O’Reilly, tel +1.610.832.9618; goreilly@astm.org, Committee Contact:, Nora Nimmerichter, tel +1.610.832.9815; nnimmerichter@astm.org Release #11656 ###
-
ASTM’s dimension stone committee ( C18 ) is developing a proposed standard that will be used to test the resistance of natural stone to long-term freeze-thaw cycles found in colder climates. “Natural stone is widely variable in composition and can include granite, sandstone, marble, and limestone, among others,” says ASTM member Frank Strickland. “This means that the resistance of natural stone…, Media Inquiries:, Dan Bergels, tel +1.610.832.9602; dbergels@astm.org, Committee Contact:, David Lee, tel +1.610.832.9681; dlee@astm.org Release #11626 ###
-
ASTM International announced today the Journal of Testing and Evaluation, the organization’s flagship journal, received an increased 2021 impact factor rating of 1.333, up 5.5% from the previous year. The impact factor is calculated each year by Clarivate Analytics and given to journals that appear in their database, Science Citation Index. Launched in 1973, the journal is a multi-disciplinary…, Media Inquiries:, Dan Bergels, tel +1.610.832.9602; dbergels@astm.org Release #11472 ###
-
ASTM International’s dimension stone committee ( C18 ) is developing a proposed standard that will be used to test the resistance of natural stone to long-term freeze-thaw cycles. ASTM International member Frank Strickland notes that the de facto standard for testing freeze-thaw resistance for natural stone has been ASTM standard C666, which describes a pass-fail test for concrete. However, the…
-
A new standard guide developed by ASTM International’s nanotechnology committee ( E56 ) seeks to familiarize laboratory scientists with background information and technical content necessary to image and identify engineered nanomaterials in cellular and noncellular samples. The standard ( E3275 ) is specific to the use of the darkfield microscopy/hyperspectral imaging analysis technique. In this…, Media Inquiries:, Jaime Martorana, tel +1.610.832.9796; jmartorana@astm.org, Committee Contact:, Kathleen Chalfin, tel +1.610.832.9717; mlynyak@astm.org Release #11273 ###
-
A proposed ASTM International standard test method will cover the determination of maturity, fineness, ribbon width, and specific surface area (micronaire) of cotton fibers. ASTM International’s textiles committee ( D13 ) is developing the proposed standard. This test method ( WK75782 ) focuses on cotton fibers from a loose, chemically untreated sample taken before harvest, during ginning,…, Media Inquiries:, Jaime Martorana, tel +1.610.832.9796; jmartorana@astm.org, Committee Contact:, Nora Nimmerichter, tel +1.610.832.9815; nnimmerichter@astm.org Release #11267 ###
-
A new ASTM International standard will support the characterization of engineered gold nanoparticles used in advanced technologies, including biomedical applications. ASTM’s nanotechnology committee ( E56 ) developed the new standard ( E3269 ). Gold nanoparticles are being used in electronics, catalysis, and advanced coatings, but the largest application has been for biomedical purposes. These…, Media Inquiries:, Jaime Martorana, tel +1.610.832.9796; jmartorana@astm.org , Committee Contact:, Kathleen Chalfin, tel +1.610.832.9717; kchalfin@astm.org Release #11258 ###
-
A new ASTM International standard test method will support the measurement of nanoparticle-based products used in a wide range of applications from cancer therapy to antibacterial coatings in textiles. ASTM’s nanotechnology committee ( E56 ) developed the new standard, which was recently published as E3247 . According to ASTM International subcommittee co-chair Vince Hackley, the standard will be…, Media Inquiries:, Dan Bergels, tel +1.610.832.9602; dbergels@astm.org, Committee Contact:, Kathleen Chalfin, tel +1.610.832.9717; kchalfin@astm.org Release #11122 ###
-
A new standard developed by ASTM International’s dimension stone committee ( C18 ) provides the first quantitative field test for determining the shear bond strength of stone tile. According to ASTM member Donato Pompo, the new standard will allow for meaningful on-site assessment of shear bond strength. It can be applied to newly adhered stone installations for quality assurance testing or to…, Media Inquiries, : Dan Bergels, tel +1.610.832.9602; dbergels@astm.org, Committee Contact, : David Lee, tel +1.610.832.9681; dlee@astm.org Release #11101 ###
-
In light of COVID-19 (coronavirus) and ongoing safety concerns for members and staff, ASTM International announced today that all previously scheduled in-person May standards development meetings (including independent meetings) have been canceled. Earlier this month, ASTM International announced the cancellation of all April in-person meetings . These decisions were based on several factors,…, Media Inquiries:, Dan Bergels, tel +1.610.832.9602; dbergels@astm.org Release #11001 ###