Search
Advanced search
Filter by category
Filter by committee
Search results
-
In light of COVID-19 (coronavirus) and growing safety concerns for members and staff, ASTM International announced today that previously scheduled April standards development meetings in Boston (March 29-April 3) and Prague (April 27-30) have been canceled. The decision was based on several factors, including, but not limited to: Continued review of information and recommendations from the U.S.…, Media Inquiries:, Dan Bergels, tel +1.610.832.9602; dbergels@astm.org Release #10993
-
ASTM International’s committee on masonry units ( C15 ) has approved a new standard that provides guidelines for masonry units manufactured with materials not currently addressed by existing ASTM standards. Traditional ASTM masonry units are manufactured out of inorganic materials that can include fired clay, shale, concrete, sand-lime, or calcium silicates. Masonry units are used for a wide…, Media Inquiries:, Dan Bergels, tel +1.610.832.9602; dbergels@astm.org, Committee Contact:, Krista Robbins, tel +1.610.832.9689; krobbins@astm.org Release #10600
-
A new ASTM International standard supports the growing use of concrete paving slabs for commercial and residential projects. The new specification ( C1782/C1782M , Specification for Utility Segmental Concrete Paving Slabs) determines the minimum flexural strength, dimensional tolerances, and freeze-thaw durability requirements for paving slabs with dimensions ranging from 12 by 12 in. to 48 by 48…, ASTM Committee C15 on Manufacturing Masonry Units Next Meeting:, Dec. 6-8, 2016, December Committee Week, Orlando, Fla., Media Inquiries:, Dan Bergels, tel +1.610.832.9602; dbergels@astm.org, Technical Contact:, David Smith, Interlocking Concrete Pavement Institute, Chantilly, Va., tel +1.703.657.6900; dsmith@icpi.org, ASTM Staff Contact:, Krista Robbins, tel +1.610.832.9689; krobbins@astm.org Release #10145
-
ASTM International has fully redesigned its International Laboratory Directory, the only directory in the world dedicated to helping manufacturers find the right labs to test their products. Independent laboratories throughout the world rely on thousands of standards and test methods, including many developed by ASTM International. By working with these labs, manufacturers can help ensure that…, Contact:, Anna Spektor, tel +1.610.832.9756; aspektor@astm.org, Media Inquiries:, Dan Bergels, tel +1.610.832.9602; dbergels@astm.org Release #10110
-
Activated carbon is processed to have small, low-volume pores that increase the surface area available for adsorption. It has applications in the medical, environmental and energy realms, among others. Since 1962, ASTM International Committee D28 on Activated Carbon has developed standards that play a pre-eminent role in how activated carbon is used. A D28 subcommittee, D28.02 on Liquid Phase…, WK47401, Xylenol Orange Dye, The xylenol orange dye test is a way to determine the relative adsorption rate of unused or reactivated carbons by adsorption of xylenol orange from aqueous solution. This is an important means for deciding which type of activated carbon to use to a specific water treatment application. “Activated carbon performance can roughly be defined as a combination of the ability to adsorb a particular…, WK47421, Particle Size Distribution, Mercury flue gas, home water filters and potable water treatment are the main applications in which powdered and fine mesh carbons are used. A proposed new test method will describe how a laser light scattering technique can determine the particle size distribution of fine mesh activated carbon. ASTM member Neal Megonnell, vice president, sales and marketing, Haycarb USA, says the proposed test…, ASTM Committee D28 Next Meeting:, April 27, April Committee Week, Anaheim, Calif., Technical Contact:, (WK47401) Adam Redding, Ph.D., Evoqua Water Technologies LLC, Northwest, Pa., tel +1.724.719.0805; adam.redding@evoqua.com and (WK47421) Neal E. Megonnell, Haycarb USA, Pittsburgh, Pa., tel +1.412.709.7487; neal@haycarbusa.com, ASTM Staff Contact:, Kelly Paul, tel +1.610.832.9745; kpaul@astm.org, ASTM PR Contact:, Barbara Schindler, tel +1.610.832.9603; bschindl@astm.org Release #9731
-
A proposed new ASTM International test method will describe a single specific integration technique that can be applied to tabulated digital measurement data acquired by modern instrumentation used for studying weathering and durability. ASTM WK45298 , Test Method for the Integration of Digital Spectral Data for Weathering and Durability Applications, is being developed by Subcommittee G03.09 on…, ASTM Committee G03 Next Meeting:, Jan. 25-27, 2015, January Committee Week, New Orleans, La., Technical Contact:, Aron Habte, National Renewable Energy Laboratory, Golden, Colo., Phone: 303-384-6389; aron.habte@nrel.gov , ASTM Staff Contact:, Jeffrey Adkins, Phone: 610-832-9738; jadkins@astm.org , ASTM PR Contact:, Barbara Schindler, Phone: 610-832-9603; bschindl@astm.org Release #9637
-
A proposed new ASTM International standard will improve the accuracy and usefulness of radiometry-related uncertainty estimates in a wide range of fast developing solar renewable energy applications, such as system performance and acceptance testing, resource assessment and solar energy system design engineering. The proposed standard, ASTM WK36479 , Practice for Uncertainty Evaluation of…
-
Manufacturers of solar radiometers and testing laboratories for solar energy, materials and durability testing will be among the primary users of a new ASTM International standard that outlines procedures using indoor test methods to calibrate radiometers with dissimilar detectors. The new standard, ASTM G207 , Test Method for Indoor Transfer of Calibration from Reference to Field Pyranometers,…, ASTM Committee G03 Next Meeting:, Jan. 29-31, 2012, January Committee Week, Atlanta, Ga., Technical Contact:, Daryl Myers, National Renewable Energy Laboratory, Golden, Colo., Phone: 303-384-6768; daryl.myers@nrel.gov, ASTM Staff Contact:, Jeff Adkins, Phone: 610-832-9738; jadkins@astm.org, ASTM PR Contact:, Barbara Schindler, Phone: 610-832-9603; bschindl@astm.org Release #8965
-
A new ASTM International standard provides a more detailed and complete description of a test protocol that has been used for more than 40 years in code requirements and specifications for fire-retardant-treated wood. This test is now also used in some codes for building products that are not wood. The new standard, ASTM E2768 , Test Method for Extended Duration Surface Burning Characteristics of…
-
Consumers who are purchasing building materials for homes want to be assured that the materials are mold resistant. A proposed new ASTM standard will allow for a mold-resistance rating to be given to specific materials, depending on how the materials perform to the test method. The proposed new standard, ASTM WK32079 , Test Method for Determination of Mold Growth on Building Products Designed for…