Search
Advanced search
Filter by category
Filter by committee
Search results
-
ASTM International’s committee on masonry units ( C15 ) has approved a new standard that provides guidelines for masonry units manufactured with materials not currently addressed by existing ASTM standards. Traditional ASTM masonry units are manufactured out of inorganic materials that can include fired clay, shale, concrete, sand-lime, or calcium silicates. Masonry units are used for a wide…, Media Inquiries:, Dan Bergels, tel +1.610.832.9602; dbergels@astm.org, Committee Contact:, Krista Robbins, tel +1.610.832.9689; krobbins@astm.org Release #10600
-
A new ASTM International standard will help gasket manufacturers test to see how their products handle various compressions and loads. The test method shows the compression properties of a gasket by measuring its deflection while subjected to an increasing load. ASTM International member Jim Lingenfelder says that the test can provide information at both ambient and elevated temperatures, helping…
-
A new ASTM International standard helps ensure quality of a new fire-fighting agent known as 2-BTP, which could be used in fire extinguishers on airplanes and elsewhere. The new standard ( D8060 , Specification for 2-Bromo-3,3,3-Trifluoro-1-Propene (CF3CBr=CH2) was developed by ASTM’s committee on halogenated organic solvents and fire extinguishing agents ( D26 ). The new specification provides…, ASTM Committee D26 on Halogenated Organic Solvents and Fire Extinguishing Agents Next Meeting:, June 14, 2017, June Committee Week, Toronto, Ontario, Canada, Media Inquiries:, Dan Bergels, tel +1.610.832.9602; dbergels@astm.org, Technical Contact:, Bradford Colton, American Pacific Corp., Las Vegas, Nev., tel +1.435.865.5037; bradford.colton@ampac.us, ASTM Staff Contact:, Kristy Straiton, tel +1.610.832.9640; kstraiton@astm.org Release #10235
-
A new ASTM International standard supports the growing use of concrete paving slabs for commercial and residential projects. The new specification ( C1782/C1782M , Specification for Utility Segmental Concrete Paving Slabs) determines the minimum flexural strength, dimensional tolerances, and freeze-thaw durability requirements for paving slabs with dimensions ranging from 12 by 12 in. to 48 by 48…, ASTM Committee C15 on Manufacturing Masonry Units Next Meeting:, Dec. 6-8, 2016, December Committee Week, Orlando, Fla., Media Inquiries:, Dan Bergels, tel +1.610.832.9602; dbergels@astm.org, Technical Contact:, David Smith, Interlocking Concrete Pavement Institute, Chantilly, Va., tel +1.703.657.6900; dsmith@icpi.org, ASTM Staff Contact:, Krista Robbins, tel +1.610.832.9689; krobbins@astm.org Release #10145
-
ASTM International has fully redesigned its International Laboratory Directory, the only directory in the world dedicated to helping manufacturers find the right labs to test their products. Independent laboratories throughout the world rely on thousands of standards and test methods, including many developed by ASTM International. By working with these labs, manufacturers can help ensure that…, Contact:, Anna Spektor, tel +1.610.832.9756; aspektor@astm.org, Media Inquiries:, Dan Bergels, tel +1.610.832.9602; dbergels@astm.org Release #10110
-
Halon 1211 is employed in hand-held fire extinguishers on civilian aircraft. A new ASTM International standard will be used to test Halon 1211 to ensure that the product will provide the required level of fire protection and is free of harmful impurities that could affect its safety in use. ASTM D7673 , Specification for Halon 1211, Bromochlorodifluoromethane (CF2BrCl), was developed by…, ASTM Committee D26 Next Meeting:, June 15, 2011, June Committee Week, Anaheim, Calif., Technical Contact:, Mark L. Robin, DuPont Fluoroproducts, Wilmington, Del., Phone: 302-999-5002; mark.l.robin@usa.dupont.com, ASTM Staff Contact:, Christine DeJong, Phone: 610-832-9736; cdejong@astm.org, ASTM PR Contact:, Barbara Schindler, Phone: 610-832-9603; bschindl@astm.org Release #8791
-
A new ASTM International standard will provide gasket manufacturers a test for measuring creep and compression that can be used for R&D and material comparisons, and as a quality assurance tool. ASTM F2837 , Test Method for Hot Compression Properties of Gasket Materials, was developed by Subcommittee F03.40 on Chemical Test Methods, under the jurisdiction of ASTM International Committee F03…, ASTM Committee F03 Next Meeting:, Oct 12-13, October Committee Week, San Antonio, Texas, Technical Contact:, James Lingenfelder, Gasket Resources Inc., Houston, Texas, Phone: 713-856-9445; jtling@durlon.com, ASTM Staff Contact:, Joseph Hugo, Phone: 610-832-9740; jhugo@astm.org, ASTM PR Contact:, Barbara Schindler, Phone: 610-832-9603; bschindl@astm.org Release #8695/Sept2010
-
Producers of fluorocarbons are invited to join in the ongoing standards developing activities of ASTM International Committee D26 on Halogenated Organic Solvents and Fire Extinguishing Agents. The committee has recently approved a new standard, ASTM D7509 , Specification for Fluorocarbon Feedstock Grade Chloroform, under the jurisdiction of Subcommittee D26.08 on Halogenated Organics Used as…
-
ASTM International Committee F03 on Gaskets has developed and approved a new standard that can be used to evaluate gasket materials covered by ASTM F104 , Classification System for Nonmetallic Gasket Materials. The new standard, F2716 , Practice for Comparison of Nonmetallic Flat Gaskets in High Pressure Saturated Steam, is under the jurisdiction of Subcommittee F03.10 on Composite Gaskets. ASTM…
-
A new ASTM International standard responds to a recent emphasis by regulatory agencies that firms manufacturing drug products demonstrate the efficacy of disinfectants used in controlled environments. The standard, ASTM E2614 , Guide for Evaluation of Cleanroom Disinfectants, was developed by Subcommittee E35.15 on Antimicrobial Agents, part of ASTM International Committee E35 on Pesticides and…