Search
Advanced search
Filter by category
Filter by committee
Search results
-
ASTM International’s thermal measurements committee ( E37 ) is developing a proposed standard that describes a reliable technique for investigating the thermal transport properties of materials. The proposed standard ( WK49591 ) will help to provide information on thermal conductivity, thermal diffusivity, and volumetric heat capacity. According to ASTM International member Artem Trofimov,…, Media Inquiries:, Dan Bergels, tel +1.610.832.9602; dbergels@astm.org, Committee Contact:, Steve Mawn, tel +1.610.832.9726; smawn@astm.org Release #11705 ###
-
ASTM International’s nuclear fuel cycle committee ( C26 ) has developed a standard describing a new technique for measuring the forward rate of glass corrosion. The new standard (soon to be published as C1926) details the stirred-reactor coupon analysis (SRCA) method, in which monolithic glass coupons are partially masked with an inert material before undergoing corrosion in a large volume of…, Media Inquiries:, Gavin O’Reilly, tel +1.610.832.9618; goreilly@astm.org, Committee Contact:, Steve Mawn, tel +1.610.832.9726; smawn@astm.org Release #11649 ###
-
In light of COVID-19 (coronavirus) and growing safety concerns for members and staff, ASTM International announced today that previously scheduled April standards development meetings in Boston (March 29-April 3) and Prague (April 27-30) have been canceled. The decision was based on several factors, including, but not limited to: Continued review of information and recommendations from the U.S.…, Media Inquiries:, Dan Bergels, tel +1.610.832.9602; dbergels@astm.org Release #10993
-
ASTM International’s committee on masonry units ( C15 ) has approved a new standard that provides guidelines for masonry units manufactured with materials not currently addressed by existing ASTM standards. Traditional ASTM masonry units are manufactured out of inorganic materials that can include fired clay, shale, concrete, sand-lime, or calcium silicates. Masonry units are used for a wide…, Media Inquiries:, Dan Bergels, tel +1.610.832.9602; dbergels@astm.org, Committee Contact:, Krista Robbins, tel +1.610.832.9689; krobbins@astm.org Release #10600
-
A new test method developed by ASTM International’s nuclear fuel cycle committee ( C26 ) will help better characterize uranium materials within the nuclear fuel cycle. Specifically, the standard ( C1871 ) outlines the “double spike” test method for isotopic analysis of uranium samples by thermal ionization mass spectrometry. “Due to improved precision, the double spike method has been used in…, Media Inquiries:, Dan Bergels, tel +1.610.832.9602; dbergels@astm.org, Committee Contact:, Stephen Mawn, tel +1.610.832.9726; smawn@astm.org Release #10495
-
A new ASTM International standard serves as a guide to help experts examine nuclear-fuel pellets, cylindrical ceramic parts that are inserted into fuel rods for use in nuclear reactors. According to ASTM International member Gregoire Toury, an AREVA advisory engineer in MOX, ceramographic examination of these pellets is crucial for verifying product quality relative to thermo-mechanical behavior…, Media Inquiries:, Dan Bergels, tel +1.610.832.9602; dbergels@astm.org, Committee Contact:, Stephen Mawn, tel +1.610.832.9726; smawn@astm.org Release #10468
-
A new ASTM International standard supports the growing use of concrete paving slabs for commercial and residential projects. The new specification ( C1782/C1782M , Specification for Utility Segmental Concrete Paving Slabs) determines the minimum flexural strength, dimensional tolerances, and freeze-thaw durability requirements for paving slabs with dimensions ranging from 12 by 12 in. to 48 by 48…, ASTM Committee C15 on Manufacturing Masonry Units Next Meeting:, Dec. 6-8, 2016, December Committee Week, Orlando, Fla., Media Inquiries:, Dan Bergels, tel +1.610.832.9602; dbergels@astm.org, Technical Contact:, David Smith, Interlocking Concrete Pavement Institute, Chantilly, Va., tel +1.703.657.6900; dsmith@icpi.org, ASTM Staff Contact:, Krista Robbins, tel +1.610.832.9689; krobbins@astm.org Release #10145
-
ASTM International has fully redesigned its International Laboratory Directory, the only directory in the world dedicated to helping manufacturers find the right labs to test their products. Independent laboratories throughout the world rely on thousands of standards and test methods, including many developed by ASTM International. By working with these labs, manufacturers can help ensure that…, Contact:, Anna Spektor, tel +1.610.832.9756; aspektor@astm.org, Media Inquiries:, Dan Bergels, tel +1.610.832.9602; dbergels@astm.org Release #10110
-
A new ASTM International test method will help improve the measurements of uranium isotope ratios, helping laboratories analyze nuclear material and supporting efforts of organizations like the International Atomic Energy Agency (IAEA). The new standard is C1832 , Test Method for Determination of Uranium Isotopic Composition by the Modified Total Evaporation (MTE) Method Using a Thermal…, ASTM Committee C26 on Nuclear Fuel Cycle Next Meeting:, June 12-17, 2016, Vienna, Austria, Media Inquiries:, Nathan Osburn, tel +1.610.832.9603; nosburn@astm.org, Technical Contact:, Stephan Richter, Institute for Reference Materials and Measurements; tel +32.14.571.701; stephan.richter@ec.europa.eu, ASTM Staff Contact:, Joe Koury, tel +1.610.832.9804; jkoury@astm.org Release #10002
-
A proposed new ASTM International standard will aid in understanding thermal transport properties, an important component in optimizing the energy efficiency of building materials and improving thermal design in electronics, fuel cells and batteries. The test described in ASTM WK46204, Test Method for Determination of Thermal Conductivity and Thermal Diffusivity of Solids and Fluids Using the…, ASTM Committee E37 Next Meeting:, Aug. 29, University of Delaware Center for Composite Materials, Newark, Del., Technical Contact:, Mattias Gustavsson, Ph.D., Hot Disk AB, Gothenburg, Sweden, Phone: +46-31-411-410; mattias.gustavsson@hotdiskinstruments.com , ASTM Staff Contact:, Thomas O’Toole, Phone: 610-832-9739; totoole@astm.org , ASTM PR Contact:, Barbara Schindler, Phone: 610-832-9603; bschindl@astm.org Release #9629