Search
Advanced search
Filter by category
Filter by committee
Search results
-
ASTM International Committee D15 on Engine Coolants has formed three new subcommittees: Subcommittees D15.22 on Non-Aqueous Coolants ; D15.25 on Diesel Exhaust Fluid ; and D15.30 on Industrial Heat Transfer Fluids . All interested parties are invited to join in the standards developing activities of these new subcommittees., D15.22, Non-Aqueous Coolants, While there has been an increased interest in non-aqueous coolants industry, there are no current ASTM standards in this area. D15.22 will begin to develop such standards. “The envisioned standards for non-aqueous coolants would be performance standards, rather than ingredient standards, to allow for formulations that are not currently proprietary,” says Jonathan T. Light, chief engineer, Evans…, D15.25, Diesel Exhaust Fluid, Diesel exhaust fluid, often referred to as DEF, is required by many diesel engine-powered vehicles delivered after January 2010. More recent environmental standards issued by the U.S. Environmental Protection Agency have created more stringent emissions standards for agricultural, construction and forestry equipment. DEF is used to reduce nitrogen oxide emissions, which allows original equipment…, D15.30, Industrial Heat Transfer Fluids, Members of D15 recognized that changes in the antifreeze industry, including new manufacturing technologies, improved inhibitor chemistries and recycling technologies, would likely be adapted to the facilities industry as a natural course of innovation. Because D15 has experience developing standards that are technically similar to the facilities heat transfer industry, it was deemed appropriate…, ASTM Committee D15 Next Meeting:, May 17-18, May Committee Week, Anaheim, Calif., Technical Contact:, (D15.22) Jonathan T. Light, Evans Cooling Systems Inc., Sharon, Conn., Phone: 860-435-2418; jtlight@comcast.net ; (D15.25) Edward Eaton Sr., Amalgatech, Phoenix, Ariz., Phone: 602-252-0280; edeaton@amalgatech.com ; (D15.30) John Panasewicz, Clear Choice Antifreeze, Henderson, Colo., Phone: 303-227-9900; johnp@clearchoiceantifreeze.com, ASTM Staff Contact:, Joe Koury, Phone: 610-832-9804; jkoury@astm.org, ASTM PR Contact:, Barbara Schindler, Phone: 610-832-9603; bschindl@astm.org Release #8837
-
ASTM International Committee C09 on Concrete and Concrete Aggregates is currently developing a proposed standard that addresses bleed stability. ASTM WK28156 , Test Method for Bleed Stability of Cementitious Grout Under Static Pressure, is under the jurisdiction of ASTM International Subcommittee C09.41 on Hydraulic Cement Grouts. When cementitious grouts bleed, mixing water separates from the…, ASTM Committee C09 Next Meeting:, Dec. 6-8, December Committee Week, New Orleans, La., Technical Contact:, Fred Goodwin, BASF Construction Chemicals, Cleveland, Ohio, Phone: 216-839-7009; fred.goodwin@basf.com, ASTM Staff Contact:, Scott Orthey, Phone: 610-832-9730; sorthey@astm.org, ASTM PR Contact:, Barbara Schindler, Phone: 610-832-9603; bschindl@astm.org Release #8648
-
A series of proposed new standards being developed by ASTM International Committee D15 on Engine Coolants would remove technical barriers that currently prevent the cost-effective replacement of ethylene glycol with more environmentally friendly glycerin in antifreeze. The proposed standards are under the jurisdiction of Subcommittee D15.93 on Research and Long Range Planning. Natural glycerin is…
-
Members of ASTM Committees C09 on Concrete and Concrete Aggregates and C01 on Cement, as well as other interested parties, are invited to join new Subcommittee C09.50 on Risk Management for Alkali Aggregate Reactions. The new subcommittee will develop standards on the mitigation of deleterious alkali-aggregate reactions in concrete. To initiate the launch of C09.50, Committees C01 and C09 are the…
-
Subjects Include Aggregate Resistivity, Lightweight Aggregates, Methacrylate Bonding Systems and Semi-Adiabatic Calorimetry The following four proposed new standards are among those currently being developed by subcommittees under the jurisdiction of ASTM Committee C09 on Concrete and Concrete Aggregates. Subject matter covered by these standards includes aggregate resistivity, lightweight…
-
ASTM Pervious Concrete Subcommittee Developing Proposed Standard for Sustainable Mixture ProportionsOnce approved, a proposed new ASTM standard will aid concrete producers in developing sustainable and durable mixture proportions for pervious concrete. The proposed new standard, WK23367 , Test Method for Evaluating the Surface Durability Potential of a Pervious Concrete Mixture, is being developed by Subcommittee C09.49 on Pervious Concrete, part of ASTM International Committee C09 on Concrete…
-
A proposed new ASTM International standard, ASTM WK22233 , Test Method for Indication of Concrete’s Ionic Conductivity, describes a five-minute nondestructive test that has the potential to replace a destructive six-hour test requiring several hours of preparation time. The proposed standard is being developed by Subcommittee C09.66 on Concrete’s Resistance to Fluid Penetration, part of ASTM…
-
Shrinkage that occurs during the drying process is a major cause of cracking in concrete. However, application of shrinkage-reducing admixtures in the field has been yielding positive results, and engineers have realized that admixtures can mitigate cracking. A new ASTM standard currently being developed by Subcommittee C09.23 on Chemical Admixtures will set minimum standards for an admixture to…
-
Because of its porous nature, pervious concrete cannot be tested using standards developed for traditional concrete. In order to fill this need, ASTM International Committee C09 on Concrete and Concrete Aggregates is developing a series of proposed test methods specific to pervious. The first of these proposed standards, ASTM C1688/C1688M , Test Method for Density and Void Content of Freshly…
-
Two new calibration standards for use with X-ray fluorescence equipment in the chemical analysis of hydraulic cement are now available from the Cement and Concrete Reference Laboratory (CCRL). The new standards are designated Portland Cements 167 and 168 and are vacuum-sealed to prevent moisture uptake. Robin Haupt, supervisor, CCRL proficiency sample program, says that the two new cements were…