Search
Advanced search
Filter by category
Filter by committee
Search results
-
ASTM International’s waste management committee ( D34 ) has approved a new standard to analyze soils and biosolids for potential contamination from per- and polyfluoroalkyl substances (PFAS). “PFAS contamination is of growing concern around the world,” says ASTM member William Lipps, general manager, government and regulatory business development/international standards development, Shimadzu…, Media Inquiries:, Gavin O’Reilly, tel +1.610.832.9618; goreilly@astm.org, Committee Contact:, Brian Milewski, tel +1.610.832.9619; b milewski@astm.org Release #11741, ###
-
ASTM International’s waste management committee ( D34 ) is developing a proposed test method that focuses on detecting hazardous hydrocarbons in soil. According to ASTM International member Wesley McCall, the proposed standard ( WK84635 ) centers around use of a steel probe called an Optical Imaging Profiler (OIP). The probe is advanced into soils and unconsolidated materials using direct push…, Media Inquiries:, Dan Bergels, tel +1.610.832.9602; dbergels@astm.org, Committee Contact:, Brian Milewski, tel +1.610.832.9619; bmilewski@astm.org Release #11640, ###
-
A new ASTM International standard will be used to help measure the concentration of potentially hazardous surfactants that are used in consumer and industrial products. ASTM’s waste management committee ( D34 ) approved the new standard (D8310). According to ASTM International member Larry Zintek, chemicals covered in the new standard are released into the environment through direct use and down…, Media Inquiries:, Dan Bergels, tel +1.610.832.9602; dbergels@astm.org, Committee Contact:, Brian Milewski, tel +1.610.832.9619; bmilewski@astm.org Release #10992
-
Today, ASTM International announced a new group focused on creating standards for non-hydraulic cement. The group will hold its first meeting on Thursday, June 15, at 9:30 a.m. as part of ASTM International’s June “Committee Week” in Toronto, Canada. The group is a subcommittee of the organization’s renowned committee on cement (C01) which is home to hundreds of technical experts and industry…, ASTM Committee C01 on Cement Next Meeting:, June 14-15, 2017, June Committee Week, Toronto, Ontario, Canada, Media Inquiries:, Dan Bergels, tel +1.610.832.9602; dbergels@astm.org, Technical Contact:, Larry Sutter, Michigan Technological University, Houghton, Mich., tel +1.906.487.2268; llsutter@mtu.edu, ASTM Staff Contact:, Scott Orthey, tel +1.610.832.9730; sorthey@astm.org R elease #10286
-
Pending approval from its board of directors, ASTM International announced yesterday the launch of a new committee focused on creating technical standards and guidance materials for cannabis and its products and processes. Yesterday, about 60 industry representatives, associations, and others convened at ASTM International’s global headquarters near Philadelphia and decided to create a volunteer…, Media Inquiries:, Nate Osburn, tel +1.610.832.9603; nosburn@astm.org, Committee Contact:, Robert Morgan, tel +1.610.832.9732; rmorgan@astm.org Release #10266
-
ASTM International’s committee on waste management ( D34 ) is seeking volunteers to help create five new standards related to waste treatment, recovery, and reuse (subcommittee D34.03)., Classification for Degradable Materials and Products (WK56175), This guide will help classify products based on how they degrade. It will support greater consistency and clarity for people who buy, sell, and use materials and products that claim to have certain degradation characteristics. In particular, the standard could help purchasing managers, waste-management operators, sustainability managers, and product managers., Guide for Operating an Anaerobic Digestion Facility (WK56176), Anaerobic digestion of organic waste, an alternative to composting, is gaining popularity for a number of reasons (e.gs., energy from biogas, avoiding fugitive leachate, improving life cycle analysis reporting). With more anaerobic digesters entering the market, there is a need for standards to measure degradation within these digesters. This new guide could help maximize safety and performance…, Practice for Estimating the Environmental Persistence of Materials Using First Order Rate Constant Calculations (WK56177), Experts working in waste management, environmental sciences, and chemical production need to know how long a product will remain intact and whether it will accumulate over time. This standard will help them estimate how long a material will remain in a specific environment, allowing them to better understand its long-term impact on the environment. Specifically, the standard provides a way to…, Guide for Materials Intended for Discard into Municipal Waste Water Treatment Facilities (WK57010), Some products are frequently discarded into wastewater systems. The guide will help determine whether a material will have a neutral, positive, or negative impact on wastewater systems. This will help companies better understand how their products degrade and choose environmentally-friendly materials., Guide for Materials Intended for Discard into Municipal Landfills (WK57011), Some products are frequently discarded into municipal landfills. The guide will help determine whether a material will have a neutral, positive, or negative impact on landfills. This will help companies better understand how their products degrade and choose environmentally-friendly materials. In addition, the standard could help waste operators determine what kinds of materials they allow to…, Committee on Waste Management (D34) Next Meeting:, April 24-27, 2017, Las Vegas, Media Inquiries:, Dan Bergels, tel +1.610.832.9602; dbergels@astm.org, Technical Contact:, Teresa Clark, ENSO Plastics, Mesa, Ariz., tel +1.623.242.2313; teresa.clark@ensoplastics.com, ASTM Staff Contact:, Brian Milewski, tel +1.610.832.9619; bmilewski@astm.org Release #10265
-
By request from industry, ASTM International will host an organizational meeting to potentially create a new technical committee that develops voluntary consensus standards for cannabis. The no-fee meeting is Tuesday, Feb. 28, at 9 a.m. EST at ASTM International’s global headquarters in, West Conshohocken, Pa., USA. Industry stakeholders and others interested in charting a path towards voluntary…, ASTM Cannabis Organizational Meeting:, Feb. 28, 2017, ASTM International, 100 Barr Harbor Drive, West Conshohocken, PA, 19428-2959 USA, Media Inquiries:, Nate Osburn, tel +1.610.832.9603; nosburn@astm.org, ASTM Staff Contact:, Christine DeJong, tel +1.610.832.9736; cdejong@astm.org Release #10251
-
ASTM International’s committee on waste management ( D34 ) recently launched work on three proposed new standards. Anyone with an interest in waste management is invited to join the work on the following proposed standards, which are being developed by a subcommittee that focuses on treatment, recovery and reuse (D34.03). Guide for Creating Product Specific Waste Hierarchy (WK55328) This proposed…, Media Inquiries:, Dan Bergels, tel +1.610.832.9602; dbergels@astm.org, Technical Contact:, Teresa Clark, ENSO Plastic, Mesa, Ariz., tel +1.623.242.2313; teresa.clark@ensoplastics.com, ASTM Staff Contact:, Brian Milewski, tel +1.610.832.9619; bmilewski@astm.org Release #10213
-
ASTM International will hold an organizational meeting to potentially create a new technical committee that develops voluntary consensus standards for the recycled vulcanized rubber industry. This includes both rubber and carbon black and has many practical applications including use in plastics, strengthening concrete, and infill for playgrounds. This, online meeting, is Wednesday, October 5 2016, at 10:00am EDT. Industry stakeholders and other parties interested in charting a path towards standardization for this industry are welcome to attend. Consensus standards could set a bar for this growing industry resulting in high-quality practices and products used worldwide. The objectives of the meeting are to: • bring a range of industry experts together…, ASTM Recycled Vulcanized Rubber Meeting:, Wednesday, 5 October 2016 at 10:00am (Eastern); online (Webex) meeting, Media Inquiries:, Dan Bergels, tel +1.610.832.9602; dbergels@astm.org, ASTM Staff Contact:, Joe Koury, tel +1.610.832.9804; jkoury@astm.org Release #10165
-
ASTM International has fully redesigned its International Laboratory Directory, the only directory in the world dedicated to helping manufacturers find the right labs to test their products. Independent laboratories throughout the world rely on thousands of standards and test methods, including many developed by ASTM International. By working with these labs, manufacturers can help ensure that…, Contact:, Anna Spektor, tel +1.610.832.9756; aspektor@astm.org, Media Inquiries:, Dan Bergels, tel +1.610.832.9602; dbergels@astm.org Release #10110