Search
Advanced search
Filter by category
Filter by committee
Search results
-
Interested parties are invited to join in the development of a proposed ASTM International standard for determining the non-volatile residue in ethanol and ethanol solutions. ASTM’s committee on bioenergy and industrial chemicals from biomass ( E48 ) is developing the proposed standard. According to ASTM International member Kari Cook, monitoring non-volatile residue content is an important…, Media Inquiries:, Jaime Martorana, tel +1.610.832.9796; jmartorana@astm.org , Committee Contact:, Brian Milewski, tel +1.610.832.9619; bmilewski@astm.org Release #11211 ###
-
A new ASTM International standard will be used to provide reference scenarios when evaluating the relative sustainability of bioproducts. ASTM’s committee on bioenergy and industry chemicals from biomass ( E48 ) developed the new standard, which fills a current need for a guide for developing reference scenarios and conditions. The new standard ( E3256 ) provides guidelines and criteria to…, Media Inquiries:, Jaime Martorana, tel +1.610.832.9796; jmartorana@astm.org, Committee Contact:, Brian Milewski, tel +1.610.832.9619; bmilewski@astm.org Release #11134 ###
-
Andrew G. Kireta Jr., vice president of market development at the Copper Development Association Inc., in McLean, Virginia, (USA), has started his term as the 2020 chair of the ASTM International board of directors. ASTM International’s board is made of 25 leaders from a variety of companies, associations, universities, government bodies, and other organizations around the world. “ASTM…, Media Inquiries:, Dan Bergels, tel +1.610.832.9602; dbergels@astm.org Release #10936
-
ASTM International’s bioenergy and industrial-chemicals-from-biomass committee ( E48 ) is creating a standard that will help companies that produce biofuel using – in part – kernel fiber. This fiber was approved as a “cellulosic feedstock” by the U.S. Environmental Protection Agency in 2014. As such, renewable biofuel that is produced using kernel fiber as a feedstock can qualify as cellulosic…, Media Inquiries:, Dan Bergels, tel +1.610.832.9602; dbergels@astm.org, Committee Contact:, Brian Milewski, tel +1.610.832.9619; bmilewski@astm.org Release #10634
-
A new ASTM International test method will help determine the carbonyl content of thermochemically derived bio-oils. Carbonyls contribute to instability during storage and processing of bio-oils. “This new standard provides a simple way to measure carbonyl content. This can help determine the quality of a bio-oil that will undergo further upgrading to fuels and chemicals,” says ASTM member Earl…, Media Inquiries:, Dan Bergels, tel +1.610.832.9602; dbergels@astm.org, Committee Contact:, Brian Milewski, tel +1.610.832.9619; bmilewski@astm.org Release #10518
-
A first-of-its-kind standard from ASTM International aims to support the introduction of ethanol as a cooking fuel, a step which will help people in developing countries access and use a safer alternative to wood, charcoal, and other traditional fuels. Each year, millions of people get sick or die due to household air pollution from cooking with traditional fuels, according to ASTM member Brady…, ASTM Committee E48 on Bioenergy and Industrial Chemicals and Biomass Next Meeting:, June 29, 2016, Bellevue, Wash., Media Inquiries:, Nathan Osburn, tel +1.610.832.9603; nosburn@astm.org, Technical Contact:, Brady Luceno, POET Clean Cooking, Sioux Falls, S.D., +1.605.965.6702; brady.luceno@poet.com , ASTM Staff Contact:, Brian Milewski, tel +1.610.832.9619; bmilewski@astm.org Release #10017
-
Recent changes in technology are now covered in a significant ASTM International standard used to measure the particle size of metal powders. The standard, ASTM B330 , Test Methods for Estimating Average Particle Size of Metal Powders and Related Compounds Using Air Permeability, is under the jurisdiction of Subcommittee B09.03 on Refractory Metal Powders , part of ASTM International Committee…, ASTM Committee B09 Next Meeting:, April 14-16, 2014, Hollywood, Fla., Technical Contact:, Frank Venskytis, Clayton, N.C., Phone: 919-553-8050; fvastm@embarqmail.com , ASTM Staff Contact:, Katerina Koperna, Phone: 610-832-9728; kkoperna@astm.org, ASTM PR Contact:, Barbara Schindler, Phone: 610-832-9603; bschindl@astm.org Release #9544
-
Flow characteristics of fine metal powders are important in filling dies for pressing of powder metallurgy compacts, which are later sintered and sometimes machined into finished parts. The flow rate, as measured by a new ASTM standard, determines the flow necessary for a precise quantity of powder to be introduced into the die. The new standard, B964 , Test Methods for Flow Rate of Metal Powders…
-
Two recently approved ASTM International standards provide user-friendly tests for properties of sintered metallurgy products. The new standards, developed by Subcommittee B09.04 on Bearings, are ASTM B962 , Test Methods for Density of Compacted or Sintered Power Metallurgy (PM) Products Using Archimedes’ Principle, and ASTM B963 , Test Methods for Oil Content, Oil-Impregnation Efficiency and…
-
A proposed new standard being developed by ASTM International Committee B09 on Metal Powders and Metal Powder Products offers a solution to the challenge of handling and characterizing very fine powders. Subcommittee B09.02 on Base Metal Powders is developing the proposed standard, WK13023 , Test Method for Determination of Tap Density of Metallic Powders by a Constant Volume Measuring Method. …