Search
Advanced search
Filter by category
Filter by committee
Search results
-
A new standard practice developed by ASTM International’spedestrian/walkway safety and footwear committee ( F13 ) provides insight on the selection of walkway surfaces when considering pedestrian safety. This standard, soon to be available as F3132, outlines key elements for selecting new or planned walkway surfaces for reduced risk of slips and falls. “Current built environment design standards…, Media Inquiries:, Jaime Martorana, tel +1.610.832.9796; jmartorana@astm.org, Committee Contact:, Travis Murdock, tel +1.610.832.9826; tmurdock@astm.org Release #11109 ###
-
A new ASTM International standard will provide a specification for low density poly vinylidene fluoride (PVDF) based materials intended for use in wire and cable jacketing. ASTM’s committee on electrical and electronic insulating materials (D09) developed the standard, which will be soon published as D8318. Low density PVDF cable jacketing is a new product that has the potential to offer…, Media Inquiries:, Dan Bergels, tel +1.610.832.9602; dbergels@astm.org, Committee Contact:, Alyson Fick, tel +610.832.9710; afick@astm.org Release #11058 ###
-
In light of COVID-19 (coronavirus) and ongoing safety concerns for members and staff, ASTM International announced today that all previously scheduled in-person May standards development meetings (including independent meetings) have been canceled. Earlier this month, ASTM International announced the cancellation of all April in-person meetings . These decisions were based on several factors,…, Media Inquiries:, Dan Bergels, tel +1.610.832.9602; dbergels@astm.org Release #11001 ###
-
In light of COVID-19 (coronavirus) and growing safety concerns for members and staff, ASTM International announced today that previously scheduled April standards development meetings in Boston (March 29-April 3) and Prague (April 27-30) have been canceled. The decision was based on several factors, including, but not limited to: Continued review of information and recommendations from the U.S.…, Media Inquiries:, Dan Bergels, tel +1.610.832.9602; dbergels@astm.org Release #10993
-
ASTM International’s magnetic properties committee is seeking participants to develop a standard for magnet assemblies used on products such as magnetic separators, point of sale displays and tool fixturing. Specifically, the new standard (WK70439) aims to describe a procedure for conducting pull tests on permanent magnet assemblies. Such tests help confirm the assembly is constructed correctly,…, Media Inquiries:, Dan Bergels, tel +1.610.832.9602; dbergels@astm.org, Committee Contact:, Kelly Paul, tel +1.610.832.9745; kpaul@astm.org Release #10932
-
Recently-approved revisions to three footwear standards align them with each other, helping test laboratories and users have greater confidence that product conformance reports will include the most current corresponding data for both testing and performance. One of the revised standards covers test methods for foot protection ( F2412 ). The remaining two are specifications for performance…, Media Inquiries:, Dan Bergels, tel +1.610.832.9602; dbergels@astm.org, Committee Contact:, Molly Lynyak, tel +1.610.832.9743; mlynyak@astm.org Release #10670
-
ASTM International’s committee on pedestrian/walkway safety and footwear (F13) recently held a four-day workshop to test instruments that measure the risks of people slipping while walking on various surfaces. According to organizers, this could help researchers, manufacturers, and others looking to improve walkway safety. The instruments – called walkway tribometers – assess slip resistance of…, Media Inquiries:, Dan Bergels, tel +1.610.832.9602; dbergels@astm.org, Committee Contact:, Molly Lynyak, tel +1.610.832.9743; mlynyak@astm.org Release #10595
-
ASTM International is developing a proposed standard for measurement of the traction of pedestrian walkways, including in wet conditions. The proposed standard ( WK60578 ) covers the use of variable-angle tribometers, which are a particular configuration of devices that measure friction. The standard is being developed by the traction subcommittee of ASTM International’s committee on pedestrian/…, Media Inquiries:, Dan Bergels, tel +1.610.832.9602; dbergels@astm.org, Committee Contact:, Molly Lynyak, tel +1.610.832.9743; mlynyak@astm.org Release #10421
-
ASTM International’s Committee D09 (Electrical and Electronic Insulating Materials) invites anyone to join in developing a new standard to help maintain the integrity of cables during an emergency such as a fire. Specifically, the proposed standard (WK52230, Test Method for Determination of Acid Gas Content of Wire and Cable Insulation or Jacket Material) will help determine the halogen content…, ASTM Committee D09 Next Meeting:, April 14-15, 2016, April Committee Week, San Antonio, Texas, Media Inquiries:, Nathan Osburn, tel +1.610.832.9603; nosburn@astm.org, Technical Contact:, Larry Ingram, Williamsport, Pa., tel +1.570.916.8448; larry77151@comcast.net , ASTM Staff Contact:, Katerina Koperna, tel +1.610.832.9728; kkoperna@astm.org Release #9960
-
ASTM International Committee A06 on Magnetic Properties has approved a new standard that covers thin steel laminations used to increase the energy efficiency of many high performance motors and generators, including those in electric and hybrid-electric vehicles, and contemporary aircraft, power generation and military systems. The new standard, ASTM A1086 , Specification for Thin-Gauge…, ASTM Book of Standards Vol. 03.04 on Magnetic Properties, . To purchase this and other ASTM standards, visit www.astm.org and search by the standard designation, or contact ASTM Customer Relations (phone: 877-909-ASTM; sales@astm.org ). ASTM International welcomes participation in the development of its standards. For more information on becoming an ASTM member, visit www.astm.org/JOIN . For more news in this sector, visit www.astm.org/sn-metals or…, ASTM Committee A06 Next Meeting:, Nov. 11-12, 2013, November Committee Week, Jacksonville, Fla., Technical Contact:, Steve Sprague, Proto Laminations Inc., Santa Fe Springs, Calif., Phone: 909-338-3744; Email: ssprague@protolam.com , ASTM Staff Contact:, Kelly Paul, Phone: 610-832-9745; kpaul@astm.org , ASTM PR Contact:, Barbara Schindler, Phone: 610-832-9603; bschindl@astm.org Release #9460