Search
Advanced search
Filter by category
Filter by committee
Search results
-
A new ASTM International standard will provide a test method related to unfixed chrome concentrations in Wet Blue. The standard, soon to be published as D8451, was developed by ASTM’s committee on leather ( D31 ). According to ASTM International member Okey Abara, Wet Blue is an intermediate product used for processing natural hides. It is produced when a tanning agent chemically binds to the…, Media Inquiries:, Dan Bergels, tel +1.610.832.9602; dbergels@astm.org, Committee Contact:, David Lee, tel +1.610.832.9681; dlee@astm.org Release #11463 ###, ,
-
ASTM International’s committee on leather ( D31 ) is developing a proposed standard that will help to assess the effect of various soling agents on leather. The primary aim of the proposed standard ( WK74216 ) is to assess the degree of resistance and cleanability of a leather surface after it has been in contact with potential staining agents. Among the effects covered in the standard are…, Media Inquiries: , Dan Bergels, tel +1.610.832.9602; dbergels@astm.org , Committee Contact:, David Lee, tel +1.610.832.9681; dlee@astm.org Release #11097 ###
-
In light of COVID-19 (coronavirus) and ongoing safety concerns for members and staff, ASTM International announced today that all previously scheduled in-person May standards development meetings (including independent meetings) have been canceled. Earlier this month, ASTM International announced the cancellation of all April in-person meetings . These decisions were based on several factors,…, Media Inquiries:, Dan Bergels, tel +1.610.832.9602; dbergels@astm.org Release #11001 ###
-
ASTM International’s magnetic properties committee is seeking participants to develop a standard for magnet assemblies used on products such as magnetic separators, point of sale displays and tool fixturing. Specifically, the new standard (WK70439) aims to describe a procedure for conducting pull tests on permanent magnet assemblies. Such tests help confirm the assembly is constructed correctly,…, Media Inquiries:, Dan Bergels, tel +1.610.832.9602; dbergels@astm.org, Committee Contact:, Kelly Paul, tel +1.610.832.9745; kpaul@astm.org Release #10932
-
A new ASTM International standard will be used to determine the alkalinity of oils used to soften the stuffing of leather products. ASTM’s leather committee (D31) developed the standard, which will soon be published as D8284. Total alkalinity is a chemical measurement of water’s ability to resist change in pH, also known as water buffering capacity. According to ASTM International member…, Media Inquiries:, Dan Bergels, tel +1.610.832.9602; dbergels@astm.org, Committee Contact: , David Lee, tel +1.610.832.9681; dlee@astm.org Release #10879
-
ASTM International’s committee on masonry units ( C15 ) has approved a new standard that provides guidelines for masonry units manufactured with materials not currently addressed by existing ASTM standards. Traditional ASTM masonry units are manufactured out of inorganic materials that can include fired clay, shale, concrete, sand-lime, or calcium silicates. Masonry units are used for a wide…, Media Inquiries:, Dan Bergels, tel +1.610.832.9602; dbergels@astm.org, Committee Contact:, Krista Robbins, tel +1.610.832.9689; krobbins@astm.org Release #10600
-
A new standard developed by ASTM International’s leather committee (D31) provides test methods to estimate its longevity. This new test method (soon to be published as D8137) provides a way to evaluate longevity considering everyday atmospheric conditions like smog and corrosive gases. ASTM International member Kadir Donmez, associate director of the leather research laboratory at the…, Media Inquiries:, Dan Bergels, tel +1.610.832.9602; dbergels@astm.org, Committee Contact:, David Lee, tel +1.610.832.9681; dlee@astm.org Release #10582
-
A new ASTM International standard supports the growing use of concrete paving slabs for commercial and residential projects. The new specification ( C1782/C1782M , Specification for Utility Segmental Concrete Paving Slabs) determines the minimum flexural strength, dimensional tolerances, and freeze-thaw durability requirements for paving slabs with dimensions ranging from 12 by 12 in. to 48 by 48…, ASTM Committee C15 on Manufacturing Masonry Units Next Meeting:, Dec. 6-8, 2016, December Committee Week, Orlando, Fla., Media Inquiries:, Dan Bergels, tel +1.610.832.9602; dbergels@astm.org, Technical Contact:, David Smith, Interlocking Concrete Pavement Institute, Chantilly, Va., tel +1.703.657.6900; dsmith@icpi.org, ASTM Staff Contact:, Krista Robbins, tel +1.610.832.9689; krobbins@astm.org Release #10145
-
ASTM International has fully redesigned its International Laboratory Directory, the only directory in the world dedicated to helping manufacturers find the right labs to test their products. Independent laboratories throughout the world rely on thousands of standards and test methods, including many developed by ASTM International. By working with these labs, manufacturers can help ensure that…, Contact:, Anna Spektor, tel +1.610.832.9756; aspektor@astm.org, Media Inquiries:, Dan Bergels, tel +1.610.832.9602; dbergels@astm.org Release #10110
-
If a leather article such as a shoe or a glove were left next to a heater for an extended period of time, would the finish remain soft and flexible or would it change color and develop cracks within the leather finish? A new ASTM International standard will help to answer that question, giving manufacturers a clear method to predict and prevent such problems. ASTM D7912 , Test Method for…, Technical Contact:, Kadir Donmez, Leather Research Laboratory, University of Cincinnati, Cincinnati, Ohio, Phone: 513-242-6300; donmezk@uc.edu, ASTM Staff Contact:, Ashley Wiand, Phone: 610-832-9551; awiand@astm.org, ASTM PR Contact:, Barbara Schindler, Phone: 610-832-9603; bschindl@astm.org Release #9623