Search
Advanced search
Filter by category
Filter by committee
Search results
-
A new ASTM International standard will help manufacturers and buyers who want to use 3D-printed stainless steel alloys, which can be made more quickly than through traditional methods. This new specification describes chemical and mechanical requirements – as well as other properties – of additively manufactured parts made from 316L (UNS 31603), which is a widely used grade of stainless steel. “…, Media Inquiries:, Dan Bergels, tel +1.610.832.9602; dbergels@astm.org, Technical Contact:, Amir Farzadfar, Ph.D. Corning Inc., Corning, N.Y., tel +1.515.664.7971; farzadfaa@corning.com, ASTM Staff Contact:, Mohsen Seifi, tel +1.610.832.9511 mseifi@astm.org Release #10175
-
ASTM International has hired a technical consultant in additive manufacturing (AM) – also known as 3D printing – to support standards development and related needs in this emerging and fast-growing field. Mohsen Seifi, Ph.D., a post-doctoral research associate at Case Western Reserve University, will serve as director of additive manufacturing programs. This action meets a need for in-house…, Media Inquiries:, Dan Bergels, tel +1.610.832.9602; dbergels@astm.org, ASTM Staff Contact:, Mohsen Seifi, tel +1.610.832.9511; mseifi@astm.org Release #10174
-
A new ASTM International standard will help deter trespassing on properties with many oil storage tanks, known as tank farms. The guide ( E2942 , Guide for Security of Tank Farm Installations for Compliance with Spill Prevention, Control and Countermeasure Plan (SPCC) Regulations) will help property owners identify fencing and lighting to protect these areas. “Oil storage facilities are located…, ASTM Committee E50 on Environmental Assessment, Risk Management and Corrective Action Next Meeting:, Oct. 25-27, 2016, October Committee Week, Orlando, Fla., Media Inquiries:, Dan Bergels, tel +1.610.832.9602; dbergels@astm.org, Technical Contact:, J. Phillip Smith, tel +1.281.497.4223; jphillipsmith@astm.org, ASTM Staff Contact:, Kathleen Chalfin, tel +1.610.832.9717; kchalfin@astm.org Release #10078
-
ASTM International and the Open Geospatial Consortium (OGC) will collaborate on developing and disseminating standards, best practices, and other tools that support the growing geospatial industry. The organizations plan to work together in areas such as data acquisition and dissemination, location-based services, and unmanned (autonomous) navigation. Daniel Smith, vice president, technical…, Media Inquiries:, Nathan Osburn, director, corporate communications, ASTM International, tel +1.610.832.9603, nosburn@astm.org or Denise McKenzie, executive director, communications & outreach, OGC, tel +1.314.546.4569, dmckenzie@opengeospatial.org, ASTM Staff Contact:, Pat Picariello, director, developmental operations, tel +1.610.832.9720; ppicariello@astm.org, OGC Staff Contact:, Scott Simmons, executive director, standards program, tel +1.970.682.1922; ssimmons@opengeospatial.org Release #10034
-
ASTM International has approved a new guide that will help environmental professionals who want to assess or repurpose landfills and chemically impacted sites. ASTM Committee E50 on Environmental Assessment, Risk Management and Corrective Action developed the new standard, soon to be published as E3033, Guide for Beneficial Use of Landfills and Chemically Impacted Sites. “The committee became…, ASTM Committee E50 on Environmental Assessment, Risk Management and Corrective Action Next Meeting:, April 11-14, 2016, April Committee Week, San Antonio, TX. , Media Inquiries:, Dan Bergels, tel +1.610.832.9602; dbergels@astm.org , Technical Contact:, Marty Rowland, NYC Department of Parks & Recreation, New York, NY., tel +1.718.6922; Marty.Rowland@parks.nyc.gov , ASTM Staff Contact:, Kathleen Chalfin, tel +1.610.832.9717; kchalfin@astm.org Release #10023
-
A proposed ASTM guide will make it easier for businesses to create parts using additive manufacturing, also known as 3D printing. Specifically, the guide will provide overarching principles of design rules in this fast-growing field. “It is very hard to come up with a single ‘right way’ to create a part using additive manufacturing,” says ASTM member Paul Witherell, a mechanical engineer at the U…, ASTM Committee F42 on Additive Manufacturing Technologies Next Meeting:, Jan. 25-28, 2016, ASTM headquarters, West Conshohocken, Pa. , Media Inquiries:, Nathan Osburn, tel +1.610.832.9603; nosburn@astm.org, Technical Contact:, Paul Witherell, National Institute of Standards and Technology, Gaithersburg, Md., tel +1.301.975.5330; paul.witherell@nist.gov , ASTM Staff Contact:, Pat Picariello, tel +1.610.832.9720; ppicariello@astm.org Release #9946
-
A new ASTM International guide will help evaluate unwanted moisture in commercial buildings. The standard provides two questionnaires that assess elevated moisture and moisture-conducive conditions. The standard has been published as E3026 , Guide for Readily Observable Moisture Affected Materials and Conditions Conducive to Elevated Moisture in Commercial Buildings: Visual Moisture Assessment…, ASTM Committee E50 on Environmental Assessment, Risk Management and Corrective Action Next Meeting:, Oct. 26-29, 2015, October Committee Week, Tampa, Fla., Media Inquiries:, Nathan Osburn, tel +1.610.832.9603; nosburn@astm.org, Technical Contact:, Jim E. Bartlett, EMG, Owings Mills, Md., tel +1.800.626.3332 ext. 7609; jbartlett@emgcorp.com, ASTM Staff Contact:, Kathleen Chalfin, tel +1.610.832.9717; kchalfin@astm.org Release #9902
-
ASTM International Committee F42 on Additive Manufacturing Technologies is working on a standard that will be used to evaluate mechanical properties for additively manufactured materials. The standard (WK49229, Guide for Anisotropy Effects in Mechanical Properties of AM Parts) will serve as a guideline for using currently available standards for measuring mechanical properties, such as fracture…, Media Inquiries:, Nathan Osburn, tel +1.610.832.9603; nosburn@astm.org, Technical Contact:, Mohsen Seifi, Case Western Reserve University, Cleveland, Ohio, tel +1.216.368.3711; mohsen.seifi@case.edu, ASTM Staff Contact:, Pat Picariello, tel +1.610.832.9720; ppicariello@astm.org Release #9828 ###
-
A proposed new ASTM International standard will describe how to plan and conduct an interlaboratory study involving additive manufacturing processes or materials. The standard (WK49230, Guide for Conducting Round Robin Studies for Additive Manufacturing) will focus on how to manage a “round robin,” providing guidance for planning to ensure that process, logistics and tools are identified and…, Media Inquiries:, Nathan Osburn, tel +1.610.832.9603; nosburn@astm.org, Technical Contact:, Shawn P. Moylan, Ph.D., National Institute of Standards and Technology, Gaithersburg, Md., tel +1.301.975.4352; shawn.moylan@nist.gov, ASTM Staff Contact:, Pat Picariello, tel +1.610.832.9720; ppicariello@astm.org Release #9821 ###
-
An ASTM subcommittee is developing a new guide (WK48549, Specification for AMF Support for Solid Modeling: Voxel Information, Constructive Solid Geometry Representations and Solid Texturing) that will lead to better interoperability with the industry design format, and ultimately to retain higher quality information for three-dimensional prints. This will build on the subcommittee’s previous work…, Media Inquiries, : Nathan Osburn, tel +1.610.832.9603; nosburn@astm.org, Technical Contact:, Jérémie Farret, Parallel Geometry Inc., Outremont, Quebec, Canada, tel +1.514.961.2375; jeremie.farret@llgeometry.com , ASTM Staff Contact:, Pat Picariello, tel +1.610.832.9720; ppicariello@astm.org Release #9792 ###