Search
Advanced search
Filter by category
Filter by committee
Search results
-
ASTM International’s thermal measurements committee ( E37 ) is developing a proposed standard that describes a reliable technique for investigating the thermal transport properties of materials. The proposed standard ( WK49591 ) will help to provide information on thermal conductivity, thermal diffusivity, and volumetric heat capacity. According to ASTM International member Artem Trofimov,…, Media Inquiries:, Dan Bergels, tel +1.610.832.9602; dbergels@astm.org, Committee Contact:, Steve Mawn, tel +1.610.832.9726; smawn@astm.org Release #11705 ###
-
In light of COVID-19 (coronavirus) and ongoing safety concerns for members and staff, ASTM International announced today that all previously scheduled in-person May standards development meetings (including independent meetings) have been canceled. Earlier this month, ASTM International announced the cancellation of all April in-person meetings . These decisions were based on several factors,…, Media Inquiries:, Dan Bergels, tel +1.610.832.9602; dbergels@astm.org Release #11001 ###
-
In light of COVID-19 (coronavirus) and growing safety concerns for members and staff, ASTM International announced today that previously scheduled April standards development meetings in Boston (March 29-April 3) and Prague (April 27-30) have been canceled. The decision was based on several factors, including, but not limited to: Continued review of information and recommendations from the U.S.…, Media Inquiries:, Dan Bergels, tel +1.610.832.9602; dbergels@astm.org Release #10993
-
Peter Pavlick, director at PBM Solutions in Solon, Ohio, has been awarded the John N. Balough Distinguished Service Award by ASTM International Committee F11 on Vacuum Cleaners . The committee honored Pavlick, a charter member of the committee, for his distinguished service, high moral integrity, and valuable leadership within F11. He also received the Award of Appreciation from the committee in…, Media Inquiries:, Dan Bergels, tel +1.610.832.9602; dbergels@astm.org Release #10093
-
A proposed new ASTM International standard will aid in understanding thermal transport properties, an important component in optimizing the energy efficiency of building materials and improving thermal design in electronics, fuel cells and batteries. The test described in ASTM WK46204, Test Method for Determination of Thermal Conductivity and Thermal Diffusivity of Solids and Fluids Using the…, ASTM Committee E37 Next Meeting:, Aug. 29, University of Delaware Center for Composite Materials, Newark, Del., Technical Contact:, Mattias Gustavsson, Ph.D., Hot Disk AB, Gothenburg, Sweden, Phone: +46-31-411-410; mattias.gustavsson@hotdiskinstruments.com , ASTM Staff Contact:, Thomas O’Toole, Phone: 610-832-9739; totoole@astm.org , ASTM PR Contact:, Barbara Schindler, Phone: 610-832-9603; bschindl@astm.org Release #9629
-
The laboratory conditions test described in a new ASTM International standard will be used by manufacturers to determine the sustained air performance and exhaust emissions of a central vacuum cleaner. ASTM F2826 , Test Method for Evaluating the Sustained Air Performance and Exhaust Emissions of Central Vacuum Cleaning Units, was developed by Subcommittee F11.22 on Air Performance , part of ASTM…, ASTM Committee F11 Next Meeting:, May 5-7, 2014, May Committee Week, Toronto, Ontario, Canada, Technical Contact:, Darrell Nieschwitz, H-P Products Inc., Louisville, Ohio, Phone: 330-875-5556, ext. 2272; dnieschwitz@h-pproducts.com, ASTM Staff Contact:, Diane Trinsey, Phone: 610-832-9661; dtrinsey@astm.org , ASTM PR Contact:, Barbara Schindler, Phone: 610-832-9603; bschindl@astm.org Release #9584
-
A proposed new ASTM International standard will provide a laboratory conditions test for determining the sustained air performance and exhaust emissions of central vacuum cleaners. ASTM WK14392 , Test Method for Evaluating the Sustained Air Performance and Exhaust Emissions of Central Vacuum Cleaning Units, is being developed by Subcommittee F11.22 on Air Performance , part of ASTM International…, ASTM Committee F11 Next Meeting:, May 5-7, 2014, May Committee Week, Toronto, Ontario, Canada, Technical Contact, : Darrell Nieschwitz, H-P Products Inc., Louisville, Ohio, Phone: 330-875-5556, ext. 2272; dnieschwitz@h-pproducts.com, ASTM Staff Contact:, Diane Trinsey, Phone: 610-832-9661; dtrinsey@astm.org , ASTM PR Contact:, Barbara Schindler, Phone: 610-832-9603; bschindl@astm.org Release #9532
-
Rotational viscometry is an easily used tool for determining the viscosity of fluids, including paints, petroleum products and polymer solutions. While standards often make use of rotational viscometry, a procedure for calibrating or validating the measurement is not always part of the standard, which could lead to results that differ from one laboratory to another. A proposed user viscosity…, ASTM Committee E37 Next Meeting:, March 14, 2014, ASTM International Headquarters, West Conshohocken, Pa., Technical Contact:, Roger Blaine, Corvallis, Ore., Phone: 302-559-6827; roger.l.blaine@gmail.com, ASTM Staff Contact:, Tom O'Toole, Phone: 610-832-9739; totoole@astm.org, ASTM PR Contact:, Barbara Schindler, Phone: 610-832-9603; bschindl@astm.org Release #9493
-
ASTM Fence Committee Approves New Standards on Ornamental Aluminum Fencing and Polymer Privacy SlatsASTM International Committee F14 on Fences has recently approved two new standards: ASTM F2957 , Specification for Ornamental Aluminum Fence Systems; and ASTM F3000/F3000M , Specification for Polymer Privacy Insert Slats for Chain Link Fabric and Privacy Chain Link Fabric Manufactured Containing Pre-Installed Privacy Slats., Ornamental Aluminum Fence Systems, ASTM F2957 was developed by Subcommittee F14.35 on Architectural Metal Fence Systems. The new standard defines minimum selection criteria and test procedures to ensure product users that an ornamental aluminum fence system has sufficient strength to withstand reasonable loads and forces, and has the appropriate combination of material and organic coating surface protection to withstand effects of…, Polymer Privacy Insert Slats, ASTM F3000/F3000M is under the jurisdiction of Subcommittee F14.40 on Chain Link Fence and Wire Accessories . ASTM F3000/F3000M covers both inserted slats that are placed into chain link fabric after the fence has been installed as well as slats that are pre-inserted into chain link mesh during the link weaving process. According to William Ullrich, principal, Link Consulting LLC, and an F14…, ASTM Committee F14 Next Meeting:, June 25, 2013, ASTM International Headquarters, West Conshohocken, Pa., Technical Contact:, (ASTM F2957) Larry Burkholder, Digger Specialties Inc., Bremen, Ind., Phone: 574-546-5999; lburkholder@diggerspecialties.com; (ASTM F3000/F3000M) William Ullrich, Link Consulting LLC, Annapolis, Md., Phone: 410-849-2610; bullrich.link@comcast.net , ASTM Staff Contact:, Thomas O’Toole, Phone: 610-832-9739; totoole@astm.org , ASTM PR Contact:, Barbara Schindler, Phone: 610-832-9603; bschindl@astm.org Release #9375
-
ASTM International Committee F11 on Vacuum Cleaners has formed a new task group to develop proposed standards for high efficiency particulate air filtration, typically known as HEPA. The task group, part of Subcommittee F11.23 on Filtration, will develop standards to clarify methodology and criteria used to define HEPA filtration for sealed vacuum cleaner systems and filter components used in…, ASTM Committee F11 Next Meeting:, May 20-22, 2013, May Committee Week, Indianapolis, Ind., Technical Contact:, Zoe Wilson, Bissell Homecare Inc., Grand Rapids, Mich., Phone: 616-735-5142; zoe.wilson@bissell.com , ASTM Staff Contact:, Diane Trinsey, Phone: 610-832-9661; dtrinsey@astm.org, ASTM PR Contact:, Barbara Schindler, Phone: 610-832-9603; bschindl@astm.org Release #9338