Search
Advanced search
Filter by category
Filter by committee
Search results
-
ASTM International’s thermal measurements committee ( E37 ) is developing a proposed standard that describes a reliable technique for investigating the thermal transport properties of materials. The proposed standard ( WK49591 ) will help to provide information on thermal conductivity, thermal diffusivity, and volumetric heat capacity. According to ASTM International member Artem Trofimov,…, Media Inquiries:, Dan Bergels, tel +1.610.832.9602; dbergels@astm.org, Committee Contact:, Steve Mawn, tel +1.610.832.9726; smawn@astm.org Release #11705 ###
-
A new standard practice developed by ASTM International’spedestrian/walkway safety and footwear committee ( F13 ) provides insight on the selection of walkway surfaces when considering pedestrian safety. This standard, soon to be available as F3132, outlines key elements for selecting new or planned walkway surfaces for reduced risk of slips and falls. “Current built environment design standards…, Media Inquiries:, Jaime Martorana, tel +1.610.832.9796; jmartorana@astm.org, Committee Contact:, Travis Murdock, tel +1.610.832.9826; tmurdock@astm.org Release #11109 ###
-
In light of COVID-19 (coronavirus) and growing safety concerns for members and staff, ASTM International announced today that previously scheduled April standards development meetings in Boston (March 29-April 3) and Prague (April 27-30) have been canceled. The decision was based on several factors, including, but not limited to: Continued review of information and recommendations from the U.S.…, Media Inquiries:, Dan Bergels, tel +1.610.832.9602; dbergels@astm.org Release #10993
-
Recently-approved revisions to three footwear standards align them with each other, helping test laboratories and users have greater confidence that product conformance reports will include the most current corresponding data for both testing and performance. One of the revised standards covers test methods for foot protection ( F2412 ). The remaining two are specifications for performance…, Media Inquiries:, Dan Bergels, tel +1.610.832.9602; dbergels@astm.org, Committee Contact:, Molly Lynyak, tel +1.610.832.9743; mlynyak@astm.org Release #10670
-
ASTM International’s committee on pedestrian/walkway safety and footwear (F13) recently held a four-day workshop to test instruments that measure the risks of people slipping while walking on various surfaces. According to organizers, this could help researchers, manufacturers, and others looking to improve walkway safety. The instruments – called walkway tribometers – assess slip resistance of…, Media Inquiries:, Dan Bergels, tel +1.610.832.9602; dbergels@astm.org, Committee Contact:, Molly Lynyak, tel +1.610.832.9743; mlynyak@astm.org Release #10595
-
ASTM International is developing a proposed standard for measurement of the traction of pedestrian walkways, including in wet conditions. The proposed standard ( WK60578 ) covers the use of variable-angle tribometers, which are a particular configuration of devices that measure friction. The standard is being developed by the traction subcommittee of ASTM International’s committee on pedestrian/…, Media Inquiries:, Dan Bergels, tel +1.610.832.9602; dbergels@astm.org, Committee Contact:, Molly Lynyak, tel +1.610.832.9743; mlynyak@astm.org Release #10421
-
Attendees of the Annual Reciprocal Meat Conference (RMC) are welcome to attend an informational session hosted by ASTM International Committee F10 on Livestock, Meat, and Poultry Evaluation Systems . The session, regarding ASTM and the history of Committee F10, will be held in San Angelo, Texas on June 21, 2016. For conference information and registration, please visit the American Meat Science…, ASTM Staff Contact:, Kelly Ann Paul, tel +1.610.832.9745; kpaul@astm.org Release #10070
-
A proposed new ASTM International standard will aid in understanding thermal transport properties, an important component in optimizing the energy efficiency of building materials and improving thermal design in electronics, fuel cells and batteries. The test described in ASTM WK46204, Test Method for Determination of Thermal Conductivity and Thermal Diffusivity of Solids and Fluids Using the…, ASTM Committee E37 Next Meeting:, Aug. 29, University of Delaware Center for Composite Materials, Newark, Del., Technical Contact:, Mattias Gustavsson, Ph.D., Hot Disk AB, Gothenburg, Sweden, Phone: +46-31-411-410; mattias.gustavsson@hotdiskinstruments.com , ASTM Staff Contact:, Thomas O’Toole, Phone: 610-832-9739; totoole@astm.org , ASTM PR Contact:, Barbara Schindler, Phone: 610-832-9603; bschindl@astm.org Release #9629
-
Rotational viscometry is an easily used tool for determining the viscosity of fluids, including paints, petroleum products and polymer solutions. While standards often make use of rotational viscometry, a procedure for calibrating or validating the measurement is not always part of the standard, which could lead to results that differ from one laboratory to another. A proposed user viscosity…, ASTM Committee E37 Next Meeting:, March 14, 2014, ASTM International Headquarters, West Conshohocken, Pa., Technical Contact:, Roger Blaine, Corvallis, Ore., Phone: 302-559-6827; roger.l.blaine@gmail.com, ASTM Staff Contact:, Tom O'Toole, Phone: 610-832-9739; totoole@astm.org, ASTM PR Contact:, Barbara Schindler, Phone: 610-832-9603; bschindl@astm.org Release #9493
-
Low frequency radio frequency identification transponders have become a common means of acquiring data at livestock collection points, such as markets, feed yards and packing plants. However, there are currently multiple LF RFID technologies that exist in the marketplace, the LF RFID Half Duplex and LF RFID Full Duplex technologies. In response, ASTM International Committee F10 on Livestock, Meat…, ASTM Committee F10 Next Meeting:, April 18-19, 2012, April Committee Week, Phoenix, Ariz., Technical Contact:, Bryan Rickard, Micro Beef Technologies Ltd., Amarillo, Texas, Phone: 806-372-2369; brickard@microbeef.com, ASTM Staff Contact:, Kelly Paul, Phone: 610-832-9745; kpaul@astm.org, ASTM PR Contact:, Barbara Schindler, Phone: 610-832-9603; bschindl@astm.org R elease #9136