Search
Advanced search
Filter by category
Filter by committee
Search results
-
ASTM International’s thermal measurements committee ( E37 ) is developing a proposed standard that describes a reliable technique for investigating the thermal transport properties of materials. The proposed standard ( WK49591 ) will help to provide information on thermal conductivity, thermal diffusivity, and volumetric heat capacity. According to ASTM International member Artem Trofimov,…, Media Inquiries:, Dan Bergels, tel +1.610.832.9602; dbergels@astm.org, Committee Contact:, Steve Mawn, tel +1.610.832.9726; smawn@astm.org Release #11705 ###
-
Interested parties are invited to join in the development of a proposed ASTM International standard for determining the non-volatile residue in ethanol and ethanol solutions. ASTM’s committee on bioenergy and industrial chemicals from biomass ( E48 ) is developing the proposed standard. According to ASTM International member Kari Cook, monitoring non-volatile residue content is an important…, Media Inquiries:, Jaime Martorana, tel +1.610.832.9796; jmartorana@astm.org , Committee Contact:, Brian Milewski, tel +1.610.832.9619; bmilewski@astm.org Release #11211 ###
-
A new ASTM International standard will be used to provide reference scenarios when evaluating the relative sustainability of bioproducts. ASTM’s committee on bioenergy and industry chemicals from biomass ( E48 ) developed the new standard, which fills a current need for a guide for developing reference scenarios and conditions. The new standard ( E3256 ) provides guidelines and criteria to…, Media Inquiries:, Jaime Martorana, tel +1.610.832.9796; jmartorana@astm.org, Committee Contact:, Brian Milewski, tel +1.610.832.9619; bmilewski@astm.org Release #11134 ###
-
In light of COVID-19 (coronavirus) and growing safety concerns for members and staff, ASTM International announced today that previously scheduled April standards development meetings in Boston (March 29-April 3) and Prague (April 27-30) have been canceled. The decision was based on several factors, including, but not limited to: Continued review of information and recommendations from the U.S.…, Media Inquiries:, Dan Bergels, tel +1.610.832.9602; dbergels@astm.org Release #10993
-
ASTM International’s bioenergy and industrial-chemicals-from-biomass committee ( E48 ) is creating a standard that will help companies that produce biofuel using – in part – kernel fiber. This fiber was approved as a “cellulosic feedstock” by the U.S. Environmental Protection Agency in 2014. As such, renewable biofuel that is produced using kernel fiber as a feedstock can qualify as cellulosic…, Media Inquiries:, Dan Bergels, tel +1.610.832.9602; dbergels@astm.org, Committee Contact:, Brian Milewski, tel +1.610.832.9619; bmilewski@astm.org Release #10634
-
A new ASTM International test method will help determine the carbonyl content of thermochemically derived bio-oils. Carbonyls contribute to instability during storage and processing of bio-oils. “This new standard provides a simple way to measure carbonyl content. This can help determine the quality of a bio-oil that will undergo further upgrading to fuels and chemicals,” says ASTM member Earl…, Media Inquiries:, Dan Bergels, tel +1.610.832.9602; dbergels@astm.org, Committee Contact:, Brian Milewski, tel +1.610.832.9619; bmilewski@astm.org Release #10518
-
A first-of-its-kind standard from ASTM International aims to support the introduction of ethanol as a cooking fuel, a step which will help people in developing countries access and use a safer alternative to wood, charcoal, and other traditional fuels. Each year, millions of people get sick or die due to household air pollution from cooking with traditional fuels, according to ASTM member Brady…, ASTM Committee E48 on Bioenergy and Industrial Chemicals and Biomass Next Meeting:, June 29, 2016, Bellevue, Wash., Media Inquiries:, Nathan Osburn, tel +1.610.832.9603; nosburn@astm.org, Technical Contact:, Brady Luceno, POET Clean Cooking, Sioux Falls, S.D., +1.605.965.6702; brady.luceno@poet.com , ASTM Staff Contact:, Brian Milewski, tel +1.610.832.9619; bmilewski@astm.org Release #10017
-
A proposed new ASTM International standard will aid in understanding thermal transport properties, an important component in optimizing the energy efficiency of building materials and improving thermal design in electronics, fuel cells and batteries. The test described in ASTM WK46204, Test Method for Determination of Thermal Conductivity and Thermal Diffusivity of Solids and Fluids Using the…, ASTM Committee E37 Next Meeting:, Aug. 29, University of Delaware Center for Composite Materials, Newark, Del., Technical Contact:, Mattias Gustavsson, Ph.D., Hot Disk AB, Gothenburg, Sweden, Phone: +46-31-411-410; mattias.gustavsson@hotdiskinstruments.com , ASTM Staff Contact:, Thomas O’Toole, Phone: 610-832-9739; totoole@astm.org , ASTM PR Contact:, Barbara Schindler, Phone: 610-832-9603; bschindl@astm.org Release #9629
-
Rotational viscometry is an easily used tool for determining the viscosity of fluids, including paints, petroleum products and polymer solutions. While standards often make use of rotational viscometry, a procedure for calibrating or validating the measurement is not always part of the standard, which could lead to results that differ from one laboratory to another. A proposed user viscosity…, ASTM Committee E37 Next Meeting:, March 14, 2014, ASTM International Headquarters, West Conshohocken, Pa., Technical Contact:, Roger Blaine, Corvallis, Ore., Phone: 302-559-6827; roger.l.blaine@gmail.com, ASTM Staff Contact:, Tom O'Toole, Phone: 610-832-9739; totoole@astm.org, ASTM PR Contact:, Barbara Schindler, Phone: 610-832-9603; bschindl@astm.org Release #9493
-
ASTM Fence Committee Approves New Standards on Ornamental Aluminum Fencing and Polymer Privacy SlatsASTM International Committee F14 on Fences has recently approved two new standards: ASTM F2957 , Specification for Ornamental Aluminum Fence Systems; and ASTM F3000/F3000M , Specification for Polymer Privacy Insert Slats for Chain Link Fabric and Privacy Chain Link Fabric Manufactured Containing Pre-Installed Privacy Slats., Ornamental Aluminum Fence Systems, ASTM F2957 was developed by Subcommittee F14.35 on Architectural Metal Fence Systems. The new standard defines minimum selection criteria and test procedures to ensure product users that an ornamental aluminum fence system has sufficient strength to withstand reasonable loads and forces, and has the appropriate combination of material and organic coating surface protection to withstand effects of…, Polymer Privacy Insert Slats, ASTM F3000/F3000M is under the jurisdiction of Subcommittee F14.40 on Chain Link Fence and Wire Accessories . ASTM F3000/F3000M covers both inserted slats that are placed into chain link fabric after the fence has been installed as well as slats that are pre-inserted into chain link mesh during the link weaving process. According to William Ullrich, principal, Link Consulting LLC, and an F14…, ASTM Committee F14 Next Meeting:, June 25, 2013, ASTM International Headquarters, West Conshohocken, Pa., Technical Contact:, (ASTM F2957) Larry Burkholder, Digger Specialties Inc., Bremen, Ind., Phone: 574-546-5999; lburkholder@diggerspecialties.com; (ASTM F3000/F3000M) William Ullrich, Link Consulting LLC, Annapolis, Md., Phone: 410-849-2610; bullrich.link@comcast.net , ASTM Staff Contact:, Thomas O’Toole, Phone: 610-832-9739; totoole@astm.org , ASTM PR Contact:, Barbara Schindler, Phone: 610-832-9603; bschindl@astm.org Release #9375